SKLSKL Posted Monday at 07:27 AM Report Share Posted Monday at 07:27 AM Hi there, I've just got a PIXELpoint Batten and when I go to add the fixture there are 7 or 8 different ProLight Battens but not the pixelpoint. Is there one similar that I could use or does a new fixture need to be created for it? Many Thanks in advance. https://www.prolight.co.uk/product_manual/EQLED059_Manual.pdf Quote Link to comment Share on other sites More sharing options...
Edward Z88 Posted Monday at 12:24 PM Report Share Posted Monday at 12:24 PM Hi @SKLSKL 4 hours ago, SKLSKL said: I've just got a PIXELpoint Batten and when I go to add the fixture there are 7 or 8 different ProLight Battens but not the pixelpoint. Is there one similar that I could use or does a new fixture need to be created for it? I would recommend operating the Equinox PIXELpoint Battens in 120-channel mode. This will allow you to patch a "40-cell – 8-bit" RGB Multicell fixture, which can be found under the “Generic” manufacturer in Add Fixtures. If you cannot find these generic multicell fixtures on your console, I would recommend updating your console’s software. If you would like installation instructions, please let me know. Once you have patched this fixture, please watch the video below for more information on controlling multicell fixtures... Please let us know if you have any questions. Quote Edward Smith Product Specialist Email Support Link to comment Share on other sites More sharing options...
SKLSKL Posted Monday at 12:44 PM Author Report Share Posted Monday at 12:44 PM Many thanks Edward, will give it a try and let you know. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.