Blackout problem

[X-Terminator]

Is it possible to Blackout LTP values ?

Now the blackout button seems to affect only the BRIGHTNESS function.

But most of my intelligent light effects blackout with the shutter/gobo wheel.

 

How should I solve this problem ?

[K-Nine]

The Blackout button only affects HTP channels (generic channels and fixture brightness parameters) and pressing it is the equivalent of bringing the Grand Master fader down to zero.

 

The Blackout button does not affect any fixture LTP channels.

[X-Terminator]

I got to the point of it only affecting the HTP channels but is there any way it will ever affect LTP channels on a Mambo ? (Perhaps a firmware update ?)

[X-Terminator]

I've figured it out myself, I created my own fixture where the shutter is an HTP channel, and the dimmer an LTP (the dimmers are disconnected inside the PRO218 scanners because of a hardware flaw)

 

Now it's working niceley

[K-Nine]

I've figured it out myself, I created my own fixture where the shutter is an HTP channel, and the dimmer an LTP (the dimmers are disconnected inside the PRO218 scanners because of a hardware flaw)

 

Now it's working niceley

 

That's certainly one way of doing it

 

Another could be to set up each of your fixtures with the shutter closed and then program that into a beamshape palette, submaster or SX button (Mambo Frog).