daoops Posted October 10, 2004 Report Share Posted October 10, 2004 Had a show last week, and programmed some submasters in a hurry. My desk is in partial, and I programmed the 4 firt subs to 4 different colors colors (from the faders), and the next 4 with some fixture chases. I set the SM 1 up to full and putted SM 6 up and it cancelled the first SM. It did not happened with the other SM2,3, and 4. And the programming was the same on all of them. This problem has happened before to. Quote Link to comment Share on other sites More sharing options...
Haytech Posted October 11, 2004 Report Share Posted October 11, 2004 This is another tagged while programming issue ... Please be sure that your fixtures are "detagged" while programming HTP chasers. yellow fixture LED stays lit. Quote Sebastian H. Pro - Sound Showtechnik The secret to creativity is knowing how to hide your sources. Albert Einstein "You can get a lot more done with a kind word and a gun" Al Capone Link to comment Share on other sites More sharing options...
daoops Posted October 11, 2004 Author Report Share Posted October 11, 2004 Thay are not lit, And after I reprogrammed the PAR64's 3 times it worked. Quote Link to comment Share on other sites More sharing options...
Haytech Posted November 1, 2004 Report Share Posted November 1, 2004 @daoops: Is it possible that your playback master was set to full while programming the subs ?, but normally it wouldnt record the fixture data when they wasn´t tagged. Quote Sebastian H. Pro - Sound Showtechnik The secret to creativity is knowing how to hide your sources. Albert Einstein "You can get a lot more done with a kind word and a gun" Al Capone Link to comment Share on other sites More sharing options...
daoops Posted November 16, 2004 Author Report Share Posted November 16, 2004 I wasn't using the fixtures this time, and nope none of them was tagged. But yesterday I programmed using some fixtures, and all ended up wrong. On SM1 I programmed a fixture show with some really white spots on the artists which worked perfectly. But on SM2 I programmed another background show with the fixtures. And it worked fine right after I programmed the values. But under the show when I changed from SM1 to SM2 some of the fixtures wouldn't change position and the other values. hmmm, funny episode I would say. Nice cozy background, and 2 REALLY WHITE spots in the middle of the stage. WHY !!!! WHY !!!! I never had theese problems with the other softwares, but after changing to v.9.6 It has only been problems. really unstable. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.