van den abbeele Eric Posted March 30 Report Share Posted March 30 Hello, For various reasons I have not yet passed from 7.13 to 7.14 ... And there, I will chain a lot of shows and maybe avoid going to 7.14, to avoid having concerns ... In any case, this is good news on the 7.15, with bugs and equalness, universes' extentions (4 for FLX's and 8 for FLX.) I look forward to being able to have all this evolve, even if for the moment I sail on 3 universes. Maybe 4, if the evolutions of the machines ask me for more addresses than the three universes allow ... Thank you very much to variety technicians ... Eric from France Quote 1 FLX + 1 wing "7.14" + 1 FLX "7.13" & 4 Wings / 2 Touchscreen // Jester 24/48 2 Swisson XND-4R5 ENode // Stairville : 4 Wash MZH 19X15w - 31 Retro Flat Par 18X 12w RGBW Electroconcept : 36 Wash 18 X 10w Q188 // ADJ 2 Spot Focus 4Z & 2 Spot Focus 5Z Led 200w - VARYTEC : 12 Varytec Hero Wash 300 FC LedStage : 10 LS200 - Spot 200w // 19 Wash Par 12 X 18W // 12 BOWLDER 12X40w WASH // 12 PARZOOM 19 X 15w // 7 LY 400 - BSW CMY LED 400w Link to comment Share on other sites More sharing options...
kgallen Posted April 10 Report Share Posted April 10 Note to Z88 folks ( @Edward Z88, @Jon Hole ) and other active members: It seems on other forums, misinformation is being spread that suggests or states (incorrectly) that all FLX - including FLX S- production has been stopped. Prospective buyers are being dissuaded from FLX S series consoles because they are "discontinued". I'm rebuffing this where I can, including a link to Jon's original statement at the top of this thread. Please be aware of this misinformation being propagated and do your bit to correct the statements where required. 1 1 Quote Link to comment Share on other sites More sharing options...
Edward Z88 Posted April 10 Report Share Posted April 10 1 hour ago, kgallen said: Note to Z88 folks ( @Edward Z88, @Jon Hole ) and other active members: It seems on other forums, misinformation is being spread that suggests or states (incorrectly) that all FLX - including FLX S- production has been stopped. Prospective buyers are being dissuaded from FLX S series consoles because they are "discontinued". I'm rebuffing this where I can, including a link to Jon's original statement at the top of this thread. Please be aware of this misinformation being propagated and do your bit to correct the statements where required. Kevin - thanks very much for letting us know. It seems no matter how clear you try to make something, people will still get the wrong end of the stick! If there is a particular thread you have found that you think it would be helpful for me to jump in, please let me know. Otherwise, I'll just keep a watchful eye out. Thanks again. Quote Edward Smith Product Specialist Email Support Link to comment Share on other sites More sharing options...
kgallen Posted April 11 Report Share Posted April 11 On 4/10/2024 at 10:47 AM, Edward Z88 said: If there is a particular thread you have found that you think it would be helpful for me to jump in, please let me know. Otherwise, I'll just keep a watchful eye out. Recent example. The respondent has replied to my post quoting a Vari-lite page but still hasn't recognised in respect of the OP being suggested an "FLX-24" that FLX-S range is NOT discontinued as he continues to assert ambiguously. What's worse is kitlane is a UK operator and posts on Blue Room too. To be frank this is partly down to Zero88 continuing to use unclear/subtly similar product names for quite different products. (I won't mention "Leap Frog"!). Quote Link to comment Share on other sites More sharing options...
Edward Z88 Posted April 11 Report Share Posted April 11 1 hour ago, kgallen said: Recent example. The respondent has replied to my post quoting a Vari-lite page but still hasn't recognised in respect of the OP being suggested an "FLX-24" that FLX-S range is NOT discontinued as he continues to assert ambiguouisly. What's worse is kitlane is a UK operator and posts on Blue Room too. Thanks Kevin - your reply is really clear, so not much more I can add really. Your time is much appreciated on this. 1 hour ago, kgallen said: To be frank this is partly down to Zero88 continuing to use unclear/subtly similar product names for quite different products. (I won't mention "Leap Frog"!). This is a fair comment - customers will occasionally say they have a "FLX", when they mean "FLX S24", so we just have to be mindful to not then tell them how to do something via syntax strings! 1 Quote Edward Smith Product Specialist Email Support Link to comment Share on other sites More sharing options...
Jon Hole Posted April 11 Author Report Share Posted April 11 Thanks Kevin. We've updated the discontinued FLX page to say "Full size" and to link to the two current FLX S consoles. 7 hours ago, kgallen said: To be frank this is partly down to Zero88 continuing to use unclear/subtly similar product names for quite different products. Agreed. Whilst I stand by our choice of name for "FLX S" (we wanted to build a family), what wasn't so wise in hindsight was not foreseeing a family of consoles back when the full sized FLX launched - we should have added a suffix to the end of the full sized FLX. We now have a much more robust naming scheme for whatever the future may bring ("FLX" or "Neo" for the family, "S" and "X" for the generation/platform, and "24", "48", "5", "15" or "Server" for the variant). 7 hours ago, kgallen said: (I won't mention "Leap Frog"!). I think it's perfectly clear that "Leap Frog" and "Leapfrog 48" were COMPLETELY different desks, but "Leapfrog 48" and "Solution" were identical. Don't know what you're talking about 😇 1 2 Quote Jon Hole Global Product Manager, Systems and Control Link to comment Share on other sites More sharing options...
van den abbeele Eric Posted April 27 Report Share Posted April 27 Good morning, Having a lot of shows that follow one behind the other, it seems difficult to me to update from 7.13 to 7.14.3, given that the shows in question all have a limited time to resolve software issues.. . I know on version 7.13 what I must not do to avoid blockages... For new performance, I keep all the settings and Fixtures & just delete Playlits and that way I am quickly operational. But I'm excited to be able to upgrade to 7.14.3 and especially while waiting for 7.15, hoping that this new version will provide, in addition to stability, good operation! To be continued and looking forward to reading you all to see how version 7.14.3 is going... A good end of the day to all, Eric Quote 1 FLX + 1 wing "7.14" + 1 FLX "7.13" & 4 Wings / 2 Touchscreen // Jester 24/48 2 Swisson XND-4R5 ENode // Stairville : 4 Wash MZH 19X15w - 31 Retro Flat Par 18X 12w RGBW Electroconcept : 36 Wash 18 X 10w Q188 // ADJ 2 Spot Focus 4Z & 2 Spot Focus 5Z Led 200w - VARYTEC : 12 Varytec Hero Wash 300 FC LedStage : 10 LS200 - Spot 200w // 19 Wash Par 12 X 18W // 12 BOWLDER 12X40w WASH // 12 PARZOOM 19 X 15w // 7 LY 400 - BSW CMY LED 400w Link to comment Share on other sites More sharing options...
van den abbeele Eric Posted June 13 Report Share Posted June 13 Hello, Glad to see that the forum is rebuilding! Beautiful day everyone Eric 1 Quote 1 FLX + 1 wing "7.14" + 1 FLX "7.13" & 4 Wings / 2 Touchscreen // Jester 24/48 2 Swisson XND-4R5 ENode // Stairville : 4 Wash MZH 19X15w - 31 Retro Flat Par 18X 12w RGBW Electroconcept : 36 Wash 18 X 10w Q188 // ADJ 2 Spot Focus 4Z & 2 Spot Focus 5Z Led 200w - VARYTEC : 12 Varytec Hero Wash 300 FC LedStage : 10 LS200 - Spot 200w // 19 Wash Par 12 X 18W // 12 BOWLDER 12X40w WASH // 12 PARZOOM 19 X 15w // 7 LY 400 - BSW CMY LED 400w Link to comment Share on other sites More sharing options...
delicolor Posted July 23 Report Share Posted July 23 If the release is still some time away I'd be happy to Beta it at our venue (FLX with S24 as backup). 1 Quote Link to comment Share on other sites More sharing options...
Wolfspeltz Posted August 4 Report Share Posted August 4 Greeting from germany. Im currently using the Solution desk and was looking to upgrade because the desk has become really laggy and some faders have position issiues where they report values that are not actually input, like reporting a dmx value of 15 but are physikly at he bottom. (this is all quite understadable because of the age of the desk) The question I now have is, will the FLX S consoles get syntax support? Because the Solution desks supported, at least some kind of syntax (idk if its the same as FLX) i grew quit used to having acces to that feature. That is also the reason i looked at the FLS console as the nex upgrade, but as its discontinued now, that obv issnt an option, so it would be nice if FLX S would gain the capabilitys of Syntax. (I just watched the 7.10 video where it is mentioned that you cant control individual pixels of non linear lights without syntax for example) Looking forward to the new features of 8.0 and if they will give me enough reason to upgrade. Quote Link to comment Share on other sites More sharing options...
scottydog75 Posted August 4 Report Share Posted August 4 16 hours ago, Wolfspeltz said: The question I now have is, will the FLX S consoles get syntax support? FLX S already has syntax support when used with a keyboard. See guide here: https://www.zero88.com/manuals/zeros/shortcuts/keyboard-shortcuts?filter=1 1 Quote Link to comment Share on other sites More sharing options...
Sven76 Posted September 2 Report Share Posted September 2 Regarding the title of this Thread: How do you define „soon“? 🤔😄 1 Quote Link to comment Share on other sites More sharing options...
scottydog75 Posted September 2 Report Share Posted September 2 I was thinking we might have heard something with PLASA being on..! 😅 One day left to go perhaps..? Quote Link to comment Share on other sites More sharing options...
kgallen Posted September 4 Report Share Posted September 4 We've all been quietly thinking the same! Some ballpark timescale would be useful so folk can plan, but I guess at the moment with changes to the team, I'm happy to cut Jon some significant slack! I guess we're all quite interested in the channel count upgrade which I suspect is a very minor change to the config of the software, but probably other new features are being rolled in too which requires development and testing effort which has been impacted recently. Quote Link to comment Share on other sites More sharing options...
Onefff Posted September 4 Report Share Posted September 4 Yes - I agree - some sort of timeline would be nice guys - even if it's to say "We're still 6 months away" would give us some guidance - with panto season coming up if we can start plotting or we wait for the upgrade. I have a Solution and an FLX S so really could do with the extra universe on the FLX... Thanks. Quote Link to comment Share on other sites More sharing options...
Davidmk Posted September 4 Report Share Posted September 4 I was at PLASA on Monday. I went hoping there'd be a Z88 announcement to discuss (a replacement for the FLX for example). Previously I'd have stopped for a chat anyway but, although VariLite weren't busy, I didn't have time after waiting to talk to Chamsys, Infinity, Vista and Lightshark about their offerings in my price bracket. Did linger over the Sirius in the "archaeology" display though. 😊 Quote Link to comment Share on other sites More sharing options...
Edward Z88 Posted September 6 Report Share Posted September 6 On 9/4/2024 at 6:49 PM, Davidmk said: I was at PLASA on Monday. I went hoping there'd be a Z88 announcement to discuss (a replacement for the FLX for example). Ah that’s a shame - I must have missed you. I was there all day Monday too in a personal capacity. 1 Quote Edward Smith Product Specialist Email Support Link to comment Share on other sites More sharing options...
Jon Hole Posted September 6 Author Report Share Posted September 6 On 9/2/2024 at 5:04 PM, Sven76 said: How do you define „soon“? 🤔😄 On 9/4/2024 at 8:33 AM, kgallen said: Some ballpark timescale would be useful so folk can plan On 9/4/2024 at 2:07 PM, Onefff said: some sort of timeline would be nice guys I'd hope by the end of September we'd have a beta for you. However, the roadmap has changed a little bit to enable us to fix some high priority bugs. Instead of being "ZerOS 7.15", this will now be: ZerOS 7.14.4 will be a bug fix release for all consoles ZerOS 8 will be for FLX & FLX S only, and will include the free of charge capacity increases We see these two releases being very close together - it's even possible (not guaranteed) that ZerOS 8 starts testing before ZerOS 7.14.4 is released. We're doing this to split the bug fixes across all consoles, and the new features / increased capacity on FLX & FLX S. 2 5 Quote Jon Hole Global Product Manager, Systems and Control Link to comment Share on other sites More sharing options...
Charlie Newman Posted September 7 Report Share Posted September 7 Just out of curiosity, how can we get access to beta releases once they come out? 1 Quote Link to comment Share on other sites More sharing options...
van den abbeele Eric Posted September 12 Report Share Posted September 12 Bonjour, J'espere juste que les soucis d'informations vis a vis des mises à jour vont s'eclaircir, de maniere à ce que Zero88 existe encore par le biais de Varylites. Ensuite il est clair que certains ont interets à ce que les "concurents" disparaissent . C'est certainement pour cela qu'il semble important à ce que les mises à jour puissent suivre... Ayant deux FLX et plusieurs wings, j'aimerai vraiment à ce que cet environ persiste. Bon courage à tous et dans l'attente de voir les futurs mise à jour... 7.14.4 pour avoir un bon environnement pour tout le monde. Merci a Edward et Jon Eric de France Quote 1 FLX + 1 wing "7.14" + 1 FLX "7.13" & 4 Wings / 2 Touchscreen // Jester 24/48 2 Swisson XND-4R5 ENode // Stairville : 4 Wash MZH 19X15w - 31 Retro Flat Par 18X 12w RGBW Electroconcept : 36 Wash 18 X 10w Q188 // ADJ 2 Spot Focus 4Z & 2 Spot Focus 5Z Led 200w - VARYTEC : 12 Varytec Hero Wash 300 FC LedStage : 10 LS200 - Spot 200w // 19 Wash Par 12 X 18W // 12 BOWLDER 12X40w WASH // 12 PARZOOM 19 X 15w // 7 LY 400 - BSW CMY LED 400w Link to comment Share on other sites More sharing options...
Jon Hole Posted September 30 Author Report Share Posted September 30 On 9/6/2024 at 11:00 AM, Jon Hole said: I'd hope by the end of September we'd have a beta for you. These two beta's are now available though our beta forum (I said by the end of September!) On 9/6/2024 at 11:00 AM, Jon Hole said: We see these two releases being very close together - it's even possible (not guaranteed) that ZerOS 8 starts testing before ZerOS 7.14.4 is released. I wasn't expecting both together, but it's great that we've managed to! 1 1 1 Quote Jon Hole Global Product Manager, Systems and Control Link to comment Share on other sites More sharing options...
Charlie Newman Posted October 5 Report Share Posted October 5 Hey, where is the beta forum? Quote Link to comment Share on other sites More sharing options...
kgallen Posted October 5 Report Share Posted October 5 4 hours ago, Charlie Newman said: Hey, where is the beta forum? By special invitation 😉 Quote Link to comment Share on other sites More sharing options...
Charlie Newman Posted October 5 Report Share Posted October 5 3 hours ago, kgallen said: By special invitation 😉 How can I get access? xD Quote Link to comment Share on other sites More sharing options...
kgallen Posted October 5 Report Share Posted October 5 20 minutes ago, Charlie Newman said: How can I get access? xD Hi Charlie - sorry for my earlier flippancy! You could email support@zero88.com and ask. There are ‘rules’ for beta testers about console experience, feedback and forum activity. This is because Zero88 don’t want to grant beta access to casual users or inexperienced users who can’t effectively engage in the beta testing process and could otherwise become a support burden. You're a relatively new user - and of course very welcome - but you might have to argue your case so early on to get beta access unless you’re otherwise an established customer known to Zero88 folk. Hope that’s more helpful! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.