Simonkbike Posted January 20 Report Share Posted January 20 Anyone else find their desk freezes on powering up? I get the old blue splash screen but it never progresses onto the black screen, then new black logo and so on. If I power off/on it goes through fine. Happens about 40-50% of starts. Anything I need to worry about? Simon. Quote Link to comment Share on other sites More sharing options...
Edward Z88 Posted January 21 Report Share Posted January 21 Hi Simon, On 1/20/2024 at 12:26 PM, Simonkbike said: Anyone else find their desk freezes on powering up? I get the old blue splash screen but it never progresses onto the black screen, then new black logo and so on. If I power off/on it goes through fine. Happens about 40-50% of starts. Thanks for your description of the issue. This definitely isn’t the expected behaviour, so might be worth troubleshooting further. The console might need a new Compact Flash card, but we’d need to troubleshoot further to confirm. To troubleshoot further, please send us an email to support@zero88.com. Please include your console’s serial number, and ideally a video of the console failing to boot. Let us know if you have any questions. 1 Quote Edward Smith Product Specialist Email Support Link to comment Share on other sites More sharing options...
Simonkbike Posted January 21 Author Report Share Posted January 21 Hey Ed. Ain'cha got anything better to do on a Sunday afternoon?? This is my leisure activity so I'm allowed. S. 1 Quote Link to comment Share on other sites More sharing options...
Worcester RGSTech Posted April 17 Report Share Posted April 17 I have also started to have the same kind of issue with my Solution. On first power up the desk seems to freeze with the blue screens on the desk illuminated ( and sometimes with the solution logo in them) but the monitor remaining blank. If I turn the desk off and on again the desk then starts up normally. Any ideas? Simon \ Quote Link to comment Share on other sites More sharing options...
kgallen Posted April 17 Report Share Posted April 17 Is there a battery in Solution? That would be my first check if so. CR2032 or similar is typical in Z88 products (at least those from this century!). Quote Link to comment Share on other sites More sharing options...
Edward Z88 Posted April 17 Report Share Posted April 17 3 hours ago, Worcester RGSTech said: On first power up the desk seems to freeze with the blue screens on the desk illuminated ( and sometimes with the solution logo in them) but the monitor remaining blank 8 minutes ago, kgallen said: Is there a battery in Solution? That would be my first check if so. CR2032 or similar is typical in Z88 products (at least those from this century!). Solution consoles do have a CR2032 coin cell battery. However, when this was starting to go flat you should have received NVR errors upon booting the console, rather than the console just failing to boot. It would be worth checking the Compact Flash card in the console is seated correctly. At which point, you might as well replace the battery too whilst the console is open. Please let us know if you'd like instructions on opening the console. Quote Edward Smith Product Specialist Email Support Link to comment Share on other sites More sharing options...
Simonkbike Posted April 17 Author Report Share Posted April 17 Hey, Apologies, I followed this up with Ed offline & never came back to update the thread, so... My last production started rehearsals in midwinter (near freezing overnight temps) with venue unheated. Shortly after my first post it warmed up a bit and I filmed the desk boot up through our production with no more freeze-ups. Battery was new. IIRC we decided it may have been CF card but left it until we had consistent issues to resolve. Colleague is lighting current production so will check how it's behaving. Simon. Quote Link to comment Share on other sites More sharing options...
Worcester RGSTech Posted April 18 Report Share Posted April 18 Thank you for the suggestions. I'll try opening the console and check that all cards are properly seated. So far there have been none of the error messages suggesting that the coin cell battery needs to be changed. And typically, it booted up normally today Simon Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.