Jump to content
Vari-Lite Controls Support Forum

Temps de monter sur led


jmd

Recommended Posts

Bonjour, je rencontre un souci quand j'enregistre des mémoires dans le master playback, quand j'utilise les projecteurs halogènes j'ai bien les temps de monter et de descente, mais quand j'utilise simplement des projecteurs LED RVB je n'ai pas accès au temps de monter et de descente simplement de couleur est-ce normal ?

Merci

jmd

 

Link to comment
Share on other sites

If your LED fixtures only have RGB DMX channels then you will need to map a different fixture definition that includes "virtual intensity".

Virtual Intensity is a feature that allows the console to scale the fixture's RGB channels proportionally to act as an overall intensity.

First, check if your fixture has its own in-built intensity or dimmer DMX channel and if so, swap to using a more suitable fixture definition.

Link to comment
Share on other sites

7 minutes ago, jmd said:

Je précise que j'ai désactivé colour dans dans setup et playback 

3 minutes ago, jmd said:

Je vais regarder, Sinon comment procès de ton sur le pupitre ou sur les appareils LED ?

Désolé, je ne comprends pas.

Link to comment
Share on other sites

30 minutes ago, jmd said:

Sorry, I wanted to know if there was anything to do on the console?

If the patched fixture only has R, G, B colour "handles" then that is all you have to work with.

If you want an "intensity" channel then the fixture definition loaded for your LED projector has to tell the desk to create a "virtual intensity" and what real fixture channels to scale.

If your LED fixture is only R-G-B then the ZerOS library will already include an R-G-B-(VI) fixture definition which you could use.

Alternatively, if your fixture has other channels (strobe, program etc) then FLX now has an inbuild fixture definition tool you could use. I've never used it though, sorry. Maybe@Edward Z88 can advise.

https://www.zero88.com/manuals/zeros/patching/add-fixtures/fixture-creator

Edit: Having quickly watched the video, I'm not sure if virtual intensity channels can be created in the on-console fixture generator.

Link to comment
Share on other sites

22 minutes ago, kgallen said:

Edit: Having quickly watched the video, I'm not sure if virtual intensity channels can be created in the on-console fixture generator.

When creating a fixture in the ZerOS Fixture Editor, if a Virtual Intensity parameter is required, ZerOS will automatically create one to scale LED emitters.

  • Like 1

Edward Smith
Product Specialist
Email Support

Link to comment
Share on other sites

Si une mémoire contient uniquement des informations sur la couleur, où seules les valeurs de couleur changent lors de l'entrée dans la mémoire, vous ne verrez qu'un temps de fondu affiché pour la couleur. Vous ne verrez les temps de fondu affichés pour « Up » et « Down » que si le signal inclut des changements dans les valeurs d'intensité.

If a cue just contains colour information, where only colour values change when going into the cue, you will only see a fade time shown for colour. You will only see fade times shown for "Up" and "Down" if the cue includes changes in intensity values.

Edward Smith
Product Specialist
Email Support

Link to comment
Share on other sites

Halogen only has intensity. When you patch a "Dimmer" fixture that gives you an intensity control.

If you don't have up/down for your LED then either:

(1) Your LED doesn't have an intrinsic dimmer channel, or you patched the wrong definition

or

(2) The cue you programmed didn't have a change in intensity

If you respond to some of the points in my earlier comments, then we can narrow this down more. At the moment you've given me no more information to help you. I'm guessing what the problem is.

Link to comment
Share on other sites

Bonjour, je reviens vers vous.

J'ai fait quelques essais hier soir concernant les temps de monter et descente.

Je rencontre le problème suivant avec des projecteurs led RVBGW

J'enregistre le 1er effet avec couleur dans Master playback a 100% j'ai bien faders UP et fade down sont enregistrés

Effet 2 je baisse et remonte à 100% avec couleurs les mêmes faders et fade UP et fade down n'apparaissent plus.

La même chose pour les effets suivants.

Je ne comprends pas 🙏

Merci 

Link to comment
Share on other sites

@jmd Can you attach your showfile please, then @Edward Z88 can take a look (save to USB stick then on PC drag and drop into a new comment).

9 minutes ago, jmd said:

Effet 2 je baisse et remonte à 100% avec couleurs les mêmes faders et fade UP et fade down n'apparaissent plus.

Can you explain this again please. Is this one cue that drops intensity to 0% and then a following cue that increases intensity to 100%?

Link to comment
Share on other sites

8 minutes ago, jmd said:

Yes, with the same fader I record a color from 0 to 100% effect one

I lower the same fader,

I go back to 100% and I no longer have Fade UP and fade down 

If I understand you correctly, the 0% and 100% need to be two separate cues.

 

Cue 1:

27 minutes ago, jmd said:

I record the 1st effect with color in Master playback at 100% I have faders UP and fade down are recorded

 

Cue 2:

27 minutes ago, jmd said:

Effect 2 I lower and raise to 100% with colors the same faders

 

Cue 3:

27 minutes ago, jmd said:

Effect 2 I lower and raise to 100% with colors the same faders

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.