-
Posts
19 -
Joined
-
Last visited
Posts posted by AlexSky
-
-
Hi everybody. There is such a problem. There is "show file 1" and "show file 2", is it possible to transfer the playback (cue stack) from 1 to 2?
Alex
-
Edward,
During the investigation, I found another error, but it turned out to be floating, and I don't always detect it.
The bottom line is as follows, when choosing LED devices, conditionally selecting the red color of the wheel, you need to remove the selections from the other wheels. Holding "undo" I turn any wheel and the remote crashes. When restarting, repeating the sequence, everything passes.
I have this bug appearing in the fixture "Briteq LED Mega Beam (6 ch)".
If I manage to detect this bug again, I will send it to the technical support email.
Alex
-
Hi guys,
Digging into the problem, unexpectedly solved it, the problem turned out to be in the choice of cell order reversal settings. I had a "cell order reversal," "Yes." As soon as I canceled the value, everything worked properly. Maybe the difficulty lies somewhere there. Temporarily changed the reverse in the devices.
While this is a temporary solution, I will wait for new updates.
Alex.
-
Well, I will try to send pictures soon.
- 1
-
1 hour ago, Edward Z88 said:
Please select the fixture, and then tap the COLOUR key. Then tap "Wheels" at the bottom of the external monitor, to view the Wheels desktop. What do the onscreen wheels display at the top of the window? If you drag the onscreen wheels, do the values change correctly?
I tried, only intensity works as well. The "RED" "GREEN" "BLUE" values are not displayed, and the values are not changed. Maybe it's about the fixture?
1 hour ago, Edward Z88 said:That is correct. If you use a standard monitor with a mouse, or a single-touch touchscreen, you will not be able to fan colours across the colour picker. Colour picker fanning is done by using 2 points of contact within the colour picker, and so a multitouch screen is required. Alternatively, you could use a tablet running the ZerOS Monitor app, as this will also allow you to use multitouch on the colour picker.
And whether in the future any ability to change FAN values will be implemented using the function keys above the trackball, for example. As in the pan/tilt grid field using the center key.
-
2 hours ago, Edward Z88 said:
Would you be able to talk me through the steps you are taking? Once you have selected a fixture, for example "10 Enter", the encoder wheels can be used to control all cells together. If you move the "Red" encoder wheel, what happens? To select an individual cell, you can then type "10 . 2 Enter" for example.
Yes, I select the "900 Enter" fixture the encoder wheel controls the intensity of all cells, select the "Color" button, the "RGB" encoder wheels do not display color values and do not change them. The same happens when "900.1 Enter" is selected. But on the external monitor, you can change the values with a trackball or a mouse in the COLOR menu.
2 hours ago, Edward Z88 said:If you are using the Colour Picker on an external touchscreen that does not support multitouch, you will not be able to fan colours across your fixtures.
How do I understand that if you use a regular monitor, you will not be able to use FAN colors?
-
Hi everyone.
Since the ORB XF branch is closed, I write here.
Updated to version 7.10 and finally thought to apply multiple pixel luminaires, but it was not here. In the library under my fixtures (Briteq LED Pixel bar RGB), there were no multichannel settings (12,24,48.50 channel) recommended Showtec LED Light Bar 16 (48Ch), which is already included in the library. Checked at Phantom ZeroOS 7.10. Everything works. I applied a patch on the console, it works, but there were problems. When you select fixtures, you can apply only intensity. Color change wheels do not work, works only in picker mode, from the mouse monitor. Also, the FAN of colors does not work. The option with LED-RGB (3Ch) is not considered, because 8 LED Pixel bar is involved, too many devices are obtained in the universe.What can be done about it?
-
Thanks, I downgrade to the version of ZeroOS 7.9.7.
I will follow the updates))
Alex
-
As I understood on the ORB XF console in version 7.9.8. the LSD screen does not work, and in version 7.9.7 everything works perfectly.
-
1 hour ago, Edward- Z88 said:
Hi Alex,
After recording a cue with intensity information stored, please tap on the "Fade Up" or "Fade Down" fields in the Cue list window. Do the encoders display fade and delay times correctly?
Edward
Checked... same values change but are not displayed on the console LSD.
-
20 hours ago, Edward- Z88 said:
Thank you for confirming. On ORB XF, if you select a fixture, and encoders 2 and 3 remain blank, please view the "Wheels" desktop on the external monitor. Are the parameters displayed on encoders 2 and 3 here? If you use the physical encoders, do the values change on the external monitor?
I checked... Yes, the external monitor displays and changes values... And on the console there is no...
-
4 hours ago, Edward- Z88 said:
I have patched a BriteQ BT-575S into Phantom ORB XF running ZerOS 7.9.8. Selecting the fixture and tapping COLOUR, shows me "Colour Wheel" and "Colour Wheel Mode" parameters on encoders 1 and 2. Tap BEAM, and gobo controls are shown on encoders 2 and 3, tap BEAM again and I can page through.
What are you seeing when doing this? Are the encoders remaining blank (blue)? Is the "Intensity" display visible above the intensity wheel? Have you held SETUP and adjusted the LCD contrast?
Yes, I did so too, and in ORB XF encoders 2 and 3 remaining blank (blue), and "intensity" and 1 encoder, work. And in Phantom ORB XF everything works great. The contrast LSD checked all right.
I also tried other fixtures.. also do not work on the console.
Alexander
-
Hi everyone.
After updating the ORB XF console, there were problems with displaying on the LSD 2x control wheels of any devices with several color values, gobo, etc.
I had to roll back to 7.9.7, everything works there...
Devices in which no values were displayed: Briteq BT-575S, Briteq BT-575W, Briteq Led Mega Beam, Briteq Led Pixel bar RGB.
It is also unclear how in 7.9.8 to create a new device using Fixture Type Editor with a resolution of .zlbr
-
Hello everyone!
I have a problem to my ORB XF is connected with 2 monitor NEC 2190uxp. After recent updates I no longer see the numbers of Submasters on the screen. How can I solve this problem?
Thank you in advance.
-
Hiya
RGB/CMY is not set in the fixture file but configurable on the console...
http://zero88.com/forum/topic/5288-colour-edit-mode-cmy-or-rgb/
Mike
Mike thanks for helpBut how then to arrive if I have LED devices with RGB configuration, and head moving with CMY configuration? Constantly to switch?AlexSky -
Hi Jon,
Whether it is possible to send the changed fixture profiles namely a color profile with CMY to RGB.
And I look for fixture for Acme iMove250S and iMove250W (8 and 16 Chn).And also it is possible to ask to find you, briteq mega strobe 1500DMX, Jem AF-1, Antari Z-1200II and Antari HZ-400Thanks in advance. -
Many thanks ! ! !
Jon
-
Hi all!!!I look for fixture for Briteq LED MEGA BEAM and LED PIXEL BAR RGBCan be to eat alternative?I thank in advance.
Transferring cue stack from showfile
in ORB & ORB XF
Posted
Oh, what a pity. Well, we will work as it is. Thanks for the quick response.
Alex