I need to clean the faders of my Sirius 24 . Most of them are "sticky" , they still work but are not sliding smooth .
Any suggestions on what to use . I know that ordinary contact spray is not a good solution .
Thanks
I'm I right in assuming that once 2 desks are connected as master/slave you use the memorybank of the master desk and the slave desk are "just" 24 extra channels giving a total of 48 channels .
I know from a previous question that both desks need to have a dmx module and need to be both connected if dmx is to be used .
There is very little to find on master/slave usage on the internet ( or the manual of the sirius24 )
Thank you
The manual states that there is (was) a 8pin din cable to link 2 desks . I assumme these are no longer available . Is it possible to make one myself and how's the pinout .
Also , is it always possible to fit a dmx module to these desk ? I'm thinkin of buying another one but it has no dmx build in ( I have a spare module on the shelf ) .
Thanks
Thank you for the info .
Another question came to mind . Can I use the DMX and 0-10v output at the same time ? Meaning , 0-10v for my dimpacks the are analog , and DMX for scannners , movingheads , strobes , ......
Hi all ,
I recently got a Sirius 24 ( + a second one for spares ) .
As far as I can see , there should be dmx inside . I was wondering if this has been fitted standard or not .
Serial n° are : 0048000 96440026 and
0048000 96440005
Thanks in advance
We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.