Love this desk.
Following is a long story. It does have a point.
The show requires specific channels to be triggered to a sound track. Lighting control is separate to audio.
The cue is run as a chase with 995 steps. When the cue is operated in PROGRAM MODE with the speed control set to full all the steps sync accurately with the music track.
Run time for the cue is 4 min : 35.61 sec. Approximately 277 milliseconds per step.
When the cue is operated in RUN MODE with the speed control set to full the steps no longer sync with the music track.
Run time for the cue is 4 min : 02.88 sec.
This equates to an error of approximately 12%.
I tried pressing the program button with the desired speed and it had no effect.
ISSUES:
1. There is no indication in either PROGRAM or RUN MODE what value the speed control is set to.
2. There is no indication in RUN MODE what step number is active so there is no way of knowing where you are in the cue.
3. Further to point 2, there is no way to tell when to stop the cue. Is there a way to add a RUN ONCE command to the cue.
4. If there was an AUTO FOLLOW ON function it would be better to run this show as a series of cues which once triggered would simply follow on. This would allow for cue parameters such as fade/wait times to be recorded for each step.
Anyone else had this problem?