-
Posts
15 -
Joined
-
Last visited
Everything posted by Exstage T.S
-
well theres 2 options lets say they have 4 channels 1-red 2-green 3-blue 4-strobe you can either address them all as 1 and then controll them using the faders or there is a fixture personality avalible somewhere on the zero88 , for led par cans to be honest if your only using them as like a wash , and not really trying for special patterns with them ,your best bet is to use them on the faders nice and simple
-
hey there alex once you have the movers running on the desk and have controll of them , the best thing i can sujjest is that you select the fixtures you want to use for the search light scene , then leave them open white , no gobo or colour , then press the position button or the wheel group button till you see Effect Size X Size Y that will allow you to make shapes with the beams e.g. figure of 8 triangle circle set the sizes to what ever you wish , then press position or wheel group again and you can set the speed and offset ,so they either do or dont move in sync save that as a memory then program the postion you want straight after and take of the ltp fade time , and set postion to snap and then save that as the memory after example Memory 1 : seachlights , movers making shapes memory 2 : snap to position i hope that helps , best of luck and hope i can help you more fellow frog newbie Sam one other thing alex , had a flick through the forums you might find this usefull http://www.aux99.co.uk/blue-room/Copy%20of...gram%20V2.5.ppt its a training presentation on the fat frog , aka a get you started guide hope it helps
-
Analouge Level 6 controller with a fat frog
Exstage T.S replied to Exstage T.S's topic in Frog Range MK1
so they wouldnt work even if it was at full ? as like a trigger? -
on the back of the fat frog theres an 8 pin locking socket for a remote now i was wondering if you can use the zero88 level 6 controller as a remote? sort of remote fader triggers or something along thoes lines any idears ? or should i just flog the level 6 controller
-
You know you are a "Frog" addict when ...
Exstage T.S replied to Haytech's topic in General Discussion
you Know Your A Frog Addict when you use it along with 4 led par cans to create mood lighing whe your girlfriend comes over , and you hit the go button as u put your arm around her LMAO! " sorry love just missed a cue " -
got another problem with the frog after using it for a while sometimes the wheels dont seem to respond , ive tried cleaning the optical sensors on the wheels but no luck seems the only way to get them to work its to reboot the desk anyone got any idears???
-
Mine Gets used in a couple of diffrent places around Walthamstow E17 area schools , theatres , outdoor music concerts, but it seems to take pride of place in my bedroom running a set of 4 dmx scanners because i got bored with my normal bedroom lights and thought hey why not mix it up at bit
-
A very good freind of mine has given me the best and cheapest repair possible AND IT WORKS What you need : 1 Clean unscratched CD Case Seethrough/ Clear. 1 Stanley Knice 1 Ruler 1 Fat Frog aobut 30 mins step one mark and cut out from the cd case a peice 4.5cm by 8.5 cm take the desk apart and remove the screen moddulle , be carefull not to loose the spacers cut out the thin coated screen from the chassis of the desk and neaten up the edges using very small peices of sticky tap , tape the peice of plastic you cut out over the hole FROM THE INSIDE!!!! carefully re attach the screen module do not do the screws all the way up , if you do MAKE SURE YOU BACK THEM OFF HALF A TURN attachind is a before and after shot any questions then feel free to ask Best of luck PLEASE NOTE : i take no responisbility if you mess up your own desk , im simply giving you an idear also it may be adviseable to put a thin ring of silicone selant around the edge , just incase you do happen to spill anything on it !
-
How do you select the memorys that you want to name ??? Thanks
-
hey there say ive got a dimmer rack of 100 channels and i want the FIRST generic FADER on the fat frog to controll channels < 1, 12 , 24 > i.e a set of channels so when i push one fader up the selected channels come up is this possible? Thanks Sam
-
ok thanks makes a bit more sence now althought 1024 channels woulda been more use than a splitter
-
cure a new lacquer..... any particular one , because i somewhat doubt a homebase jobbie is going to cover it ?
-
so how why is there 2 dmx outputs on the FAT FROG , ok ive not looked into it greatly 2 universies should mean 1024 dmx channels right ? so why does the desk only ever list 512? am i missing something ? id like to use univers A for generics and univers B for fixtures , is it possible on the fat frog Thanks Sam
-
ok zero88 thanks for merging this shame that theres still no OFFICAL REPAIR to be honest the only thing i can think of doing is this open the desk , cut the flim screen off and replace with a 1mm sheet of clear acrylic aplied with small amounts of silicone sealant any sujjestions other than that??? thanks Sam
-
hey ive got a fat frog its been used for sometime and the coating on screen a has started to peel off and its not a major concern just makes it a pain to look at any recomendations ???? Thanks Sam