Bozo

We have just added 6 Chauvet Colorpalettes. 2 issues: 1. We have used fixture tools to build the user fixture, but there are some functions that aren't working like many of our other fixtures. When we go to load the fixture to adjust settings, we don't have intensity control where most fixtures do (i.e. - after selecting Group>fixture> there is usually an "intensity" section under position. We want that with these fixtures as well. 2. When we load the fixture and then assign it to a udf, the intensity appears to be reversed - fader all the way up is "0" and fader down is 100% - we would like this the other way around. Any advice would be appreciated. Here is the DMX Channel Summary (27 channel mode) from the Chauvet Manual. CHANNEL/FUNCTION 1 Mode 2 Auto Speed 3 Strobe 4 Red 1 5 Green 1 6 Blue 1 7 Red 2 8 Green 2 9 Blue 2 10 Red 3 11 Green 3 12 Blue 3 13 Red 4 14 Green 4 15 Blue 4 16 Red 5 17 Green 5 18 Blue 5 19 Red 6 20 Green 6 21 Blue 6 22 Red 7 23 Green 7 24 Blue 7 25 Red 8 26 Green 8 27 Blue 8 Thank you.

1. The big overview is that we need to figure out how to transition from a page with multiple playbacks (CS) and multiple cues to another page with multiple playbacks and multiple cues to a ready and waiting position where the first Cue in each playback (CS) is triggered - and subsequent cues can be triggered - all with the Master Go button. Scenario: 1. Playback fader 1 has 6 Robe Color Washes - 575at (i.e - Cue Stack 981) 2. Playback fader 2 has 4 Robe Color Spots - 575at (i.e - Cue Stack 982) 3. Playback fader 6 has 4 Robe Color Washes 250at (i.e - Cue Stack 986) 4. Playback fader 7 has 1 Coemar Prospot 250LX (i.e - Cue Stack 987) 5. Playback fader 8 has 2 Robe Color Spots - 250at (i.e - Cue Stack 988) *Each of these have the same number of multiple cues in them - We working our way through them by using the Master Go button. Colors for the Fader 6 washes (250at) are triggered by UDK's 1-8 Colors for the Fader 1 washes (575at) are adjusted by udf's 6, 7 and 8. Question 1 - *Can we set something where the udk colors arrive at full color intensity in "x" seconds? 2. Under the above Scenario: Question 2 - Can the spots to fade out before they start moving to the next "song" or "sermon" since they have no color mixing - (we don't want to see the colors scroll). *as is stands right now, we don't seem to be able to override the intensity of the spots - they just stay on @ whatever intensity faders 2 and 5 are set. * The washes can stay on while they move (since they have color mixing). 3. Macros Question 3 - Is there a way to adjust a macro (one that is programmed and saved in the Macro Window) - where it launches the steps quickly rather than in real time? 4. Question 4 - is there a better way to be setting all of this up?