Jump to content
Vari-Lite Controls Support Forum

stagefrog

Regulars
  • Posts

    28
  • Joined

  • Last visited

Everything posted by stagefrog

  1. Hi Dave Thank you for your hint, but the problem I encountered, is just the opposite of the problem reported by RAW Lighting Power. My Position Palettes are losing previous recorded movements, without rebooting the frog or loading the showfile from disk!
  2. Hi all I work alot with a Leapfrog Console and I think it's a really powerful lighting console. But i am missing some features: - for me it woud be very useful if i had more than 24 Record places per Palette group. (I know, that this feature was discussed before) With the palettes you are really fast in running and controlling a liveshow, but if you use more than one fixture then the palettes places are not enough (especially the Beamshape-Palette). With two different Fixtures you have up to 9 Gobo's per Fixture and some rotating effects and some other effects. Without the ability to program down to individual parameters you have to store each Gobo with ond without rotating, with and without prism effects and so on. To do so i would be happy to have more palettes places. - a blind mode (not only a blind edit mode) would be really helpful - a possibility to scroll through te memory and or the subs list. if you have to change the fade up time on some cues it would be fine if you could leave the cursor on the fade time field and then just move down to the next cue to edit its fadetime and so on. Till now you have to go back to the cue number list then move down to the next cue and then go right to the fade time field again, which is a little bit impractical. But the new features added with os 9.2 are really good and helpful. Thank's. stagefrog 8)
  3. Last weekend i had to program and to run a show. There were some generics, 4 Technobeams and 4 Studiospots connected to our LeapFrog. I used the effectengine to create some movement effects and then stored it in palettes. It seemed that everything was working fine, but suddenly the movement effects stored to the position palette disappeared. :? :?: So the Movings and Scanners went to a position and stayed there, instead of moving in a Figure8 or another movement. I'm running OS 9.2. And i was sure, that i didn't do any mistake while programming. Did anybody encounter the same problems? Can anybody help?
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.