Jump to content
Vari-Lite Controls Support Forum

Yves

Regulars
  • Posts

    163
  • Joined

  • Last visited

Posts posted by Yves

  1. these are some pictures of a show I did last week

     

    il2p4_1.jpg

     

    il2p4_2.jpg

     

    il2p4_3.jpg

     

    il2p4_4.jpg

     

    il2p4_5.jpg

     

    il2p4_6.jpg

     

    il2p4_7.jpg

     

    In this show I used:

    - 2 zero88 mambofrog

    - 16 Movitec SL250

    - 20 Martin Mac 2000 profile

    - 3 Martin Mac 600

    - 4 Martin Atomic 3000

    - 8 lineblinder

    - 7W laser (green)

    - 8W laser (full color)

    - 24 dimmer channels

  2. I'm doing an event next weekend where we need a lot of lights. We contacted an other rental company and ordered some truss, 8 movitec sl250, 2 martin mac 600, 2 mac 2000 and 18 martin mac 500. everything was ok and the contracs signed.

     

    2 weeks ago the company contacted us and let us know that the mac 500 weren't availeble. We agreed that we would get the new Mac700 instead of the 500.

    I was verry happy of course. always better to have stronger lights :twisted: .

     

    But this week the company contacted us again and said that the mac700 were stuck at the customs authorities. So now we had no 500 or 700.

    my world collapsed, becouse I already programmed my show.

    the other company understood this and were also unhappy about the situation. then they made a proposal that made me verry happy.

    we would get 20 mac 2000's 8) .

     

    Now you can see that a problem can be verry good in some situations.

     

    the total quantity lights that I'm controlling are:

     

    - 20 * Mac 2000

    - 4 * Mac 600

    - 16 * sl250

    - 8 * sunstrip

    - 7 pars with rainbow color changer

    - 3 * 5W laser

     

    everything exept the lasers will be controlled with 2 mambofrogs

     

    I will post a movie or pictures here as soon as I can.

  3. these plans are made with Wysiwyg from Cast Software. Link

    Other programs are:

    - Capture Link

    - Martin show designer Link

     

    most of these programs have a download section on their website where you can download a trial version. This versions are mostly limited by time, functions, ...

     

    These demos will give you an idea of how the full sotware will be so you can see if it has all the functions you need.

     

    But be aware, software like this is expensive.

    The pictures on your link are also made with the demo version because I only need the software a couple of times a year.

     

    greetz

    yves

  4. the music is mainly hardstyle, jump and house.

     

    the truss is located above the visitors and around the stage.

     

    I have a wysiwyg screenshot, but I'm not able to upload it now.

    Going to do that tomorrow.

     

    We already have pyro effecs in the truss, but were needing something visual for the whole evening.

     

    greetz

    Yves

  5. we have a party in april where we have a lot of truss. so my question is,: has somebody some ideas so we can fill the gaps between the heads? previous editions we used led tubes and paper sferes with strobes in them, and this time we need something new. It doesn't have to be complex and expensive, but it must be notable.

     

    thx

    yves

     

    ps. The fixtures we already have are:

     

    - 16 movitec SL250

    - 4 martin 3000

    - 4 martin MAC 600

    - 20 martin MAC 500

    - 2 martin MAC 2000

    - 4 pulsar chromabank

    - 4 blinder

    - 8 lineblinder

     

    and 160m truss, so we have a lot of open space :cry:

  6. update:

     

    it was a great party. More than 5500 partypeople and the lights worked great. It wasn't that difficult to control 2 mambo's as I thought.

     

    had an error (FbER) on one of the Mac's but it workes fine does anybody know what it means?

     

    here are some pictures of the show.

    I will post the movie when it's finished.

     

    il2p1.jpg

     

    il2p2.jpg

    (We had to put a truss on the floor becouse of the weight)

     

    il2p3.jpg

    (LED tubes are really great 8) )

     

    il2p4.jpg

     

    il2p5.jpg

    (a lot of people 8O )

     

    il2p6.jpg

    (THE END)

     

    il2p7.jpg

    Me controlling 2 mambo frogs)

  7. I had this problem with V9 and V10.

    The mode is correct for as far I know, but will chack this tomorrow.

    I have a lot to do this week and they have to dim this friday, so I hope the problem will be solved quickly.

    First I'm going to see how I can patch 16 Mac500, 4 Mac600 and 16 Movitec SL250 on a mambo and draw a dmx set-up for this weekend :roll: .

  8. I tried this during the set-up today and I can't dim the martin atomic 3000 like you guys say. With the grand master they worked fine and manually also.

    But when I turn the brightness @ 0 then they won't work.

    When I turn brightness @ 100% and put the sub up they flash @ full power.

    I checked the mode on the strobes and they are in mode 4 just like the fixtures in the mambo.

    Probably I'm doing something stupid wrong, but I don't know what.

  9. Ok, this is my problem.

     

    When I program our atomic 3000 strobes (mambo frog) and transfer the program to a submaster I can't dim the strobes like a head etc..

    It has a brightness channel but if I program the strobes at a desired speed they just won't dim. I have to createa program with the rate @ 0 to turn them off.

    does anybody have an idea what I'm doing wrong and explain to me how I can create this?

     

    greetz

    yves

  10. You can program channel data (generic channels and fixture parameters) directly onto a submaster.

     

    You cannot program a chase directly onto a submaster - you program a memory as a chase (see earlier) and then simply transfer the chase memory onto the submaster.

     

    Never tried to program a chase directly on to a sub, but I thought that if it works with chanal data, a chase would work also. :oops:

  11. Edit: Damn, I'm slower than ICE :cry:

     

    1. Once I setup my chase steps, how do I playback the chase?

    Edit: see point 3

     

    2. How do I setup a second, third,... chase?

    If you are programming the chases on a memory, you just have to change the number of the memory and create a new one.

    When programming directly on subs, change the number of the sub.

     

    3. How do I assign various chases to submasters for playback?

    If you have programmed the chase on a memory, go to memories via the memory button, select the memory and press transfer no time + the flash button of the sub where you want the chase to be on. repeat this for multiple chases.

     

    4. In order to "slow down" how fast the intel. fixtures move, how do I do that (I'm using SGM Victory-II 250's). I basically don't want them to "snap" from one position to the next. (Although I do in some situations!) I am programming some fixtures for a dance/nightclub environment.

    when programming a chase you can choose if the Pos action is snap or fade and then set the speed.

    chases.jpg

  12. there will be a second operator at the desk, but I will be controlling both desks most of the time.

    the Hog1000 was indeed a better option, but our company doesn't have one and if we'd have to rent one just for learning would be a bit expensive. In april we're doing the 4th edition of this party and by then I hope to have learned the Hog or maybe a Frog2 :wink: .

  13. Update:

     

    The show will be controlled with 2 * Mambo frog and we've added 44 LED tubes to the rig. Where these will be I don't know, but I'm sure the amount of truss is large enough to fit them all 8)

     

    after the event I will post some pictures and maybe a movie.

     

    I'm going to try to create an equal impressive show like we did in april.

    The movie of this can be found Here (12.7 MB)

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.