Haytech

Sorry that my impression is that difficult but Mars has understand what´s in my mind on that.

this is the usual or common term for full ( 100 % ) in Lighting due to hex writing in digital world there FF is 255 ! I think this is why zero88 and others use the FF to store and display the value. Greets Sebastian

Hi Please have a look into the possibilities to "mirror" the Position data of Fixtures this would be a good function. If I pos a scan beam into center stage would it be possible to pos the opposite scan beam on mirrored (!) not inverted parameters middle of stage is our mirror axis - so it should be very easy to program nice symmetrical scenes - ( i love stage symmetric ) Certainly I should mail this suggestion to franck Thx Sebastian

Hello Zero88 guys What is your decision about international forum board ? Thanks many Sebastian

Hope Software isn´t chosing "suitable sounds" for it

I choose "Happy wheel user" I think its a little tricky to drive fixtures with a Joystick or Trackerball have you ever use the Scancommanders Trackball with moving haed in a live situation ? - its dammed difficult to move that nice and slow like a followspot. Greets Sebastian

What kind of moving head do you use ? - most of them have a movement speed option. push thru the other wheel groups of position search for Mspeed.

Hello, this could be try to put some stereo jack on it I´ve done it with my KORG MC30 to get a beat and it worked fine Greets Sebastian

I´ve thought about a techi type one. I can always help in german my english is not as well as it should be

Franck is right ... It´s a great information forum for users with problems by using the desk. Additional it gives us (users) a voice to tell about problems and make suggestions of features just sugestions ! you shouldn´t flame anyone ! Sebastian

Hey zero88 folk, if possible we should have a International Topic for all out of there writing and spaeking terrible english like me :mrgreen:

Sorry to interfere I like the desks as they are - disregarding some little points zero is working on so it is not recommended of many of its users that a desk it is made for using 12 fixtures enables you to use i.e. 48 fixtures by putting another software on it - I think there is a little less infrastucture in it. Try to mirror your DMX addresses then you can use more than 12 fixtures i.e. first one gets 1 next one gets 8 next one gets 1 next one 8 and so on. regards Sebastian

Uh Oh I think this would make K-Nine very unhappy it´s his manual you are talking about ... You have to read it once more - don´t forget those tricky footnotes they are very helpful in some case What kind of problems do you have maybe we can help you - don´t hesitate to ask any question I´ve done it before and this is a real good helpdesk Have Phun Greets Sebastian

seemed to be a little complicated :? but a good idea. Most dimmers like Zero88 spice, have a non-dim function called switch. put your propertylamps chan to switch and it will not be dimmed any more. Sometimes it is possible to to set up the switch parameters.

Good morni´n I Kirkup_xp, I like your impression of using a DEMUX to control more than one chan. Other way same thing: some dimmer provide internal chan patching like Arena dimmers

Dear Pipo, K has mentioned before that offset is only working on "movement effects" what you want to reach is a colour wave on some washlights - just a example Hold the colour parameter button you will see that you can use the fan function to increase colour value - it works very fine - I´ve tried it before with 6 washlights. If you want to automatically switch or fade thru the colours or beamshape have a look at the frog function - could be very useful too.

Please don´t program a help function - this would cost to much memory - and I need every bit :mrgreen: Still reading the manual 8O

Hello gusrocks I was curious come to know what you want to do with this function - I haven´t seen this on any other desk I think this is getting user a little confused :? at programming of runnig a show ...

Hello K-Nine, sometimes (late at night day before a tour) it´s hard to read a manual even if it is about a cool frog. :mrgreen: You are right if you think I didn´t read the manual intent. But now I will read it for sure ;-) Thanks for that grat desk and it´s precisely manual Sebastian

Thats it, Thank U - It works very fine ! I haven´t understand, that fixture brightness is stored anyway (tagged and untagged) before I have tried to store brightness by pressing brightness button It seemed to be wierd to get a chase without LTP data but now I know it and it´s great ! Thank U again :mrgreen:

Hallo duck, nun was hast Du für Probleme mit deinem Betapack ? Treten Sie nur bei Channel 3 & 4 auf ? Hast Du die elektrischen Verbindungen geprüft ( CEE Stecker ) oder in einer Festinstallation die Sicherungen der Phase L2 ? MFG Haytech

Hello K-Nine yesterday I took another one and it worked fine, then I tried to press any key on this keyboard and voila I´ve found the problem. If I press the Strg/Ctrl Key the Keyboard seemed to be off press the button once again Keybord is on like before. Same happens with other keyboards Cherry/Keytronic It seem to be a feature like keylock, but I didn´t found on manual. If I know how to switch on again keyboard I have no problem running a show. Thanks Sebastian

You have to use a lot of asynchronous horizontal fluters

I like this impression - If it´s possible to set up your own pallets with User Fixture File Editor then we can define our own "default" paletts - setup pallets on desk should be able any times.

Graham, If visualization pack is possible I certainly would pay it ! something about 200 € would be a nice price ! If this tool is much more expensive nobody will buy it then, I think.