KWR88

Hi ted,
 
On the older units (assuem we are talking about the unit with just 2 LCD's) the only way to change the home position is by editting the actaul profile on a PC then loading it back in.
Your idea of setting a working light to the same address is the way I woudl approach this as well.

You will need to download the fixture library from the link below then use the fixture tools on the other link to either export the fixtures you require to a file or create a CFT file us
 
http://zero88.com/support/index.php?/Knowledgebase/Article/View/58/
 
You can either use the fixture tools on the link below to create a CFT file to load into the desk or create a mini library fo upto 50 fixtures.
 
http://zero88.com/support/index.php?/de/Knowledgebase/Article/View/49/0/zero-88-fixture-tools---version-26
 
If you create a CFT file you load this onto the desk by going into Super user, floppy options and selecting load CFT.
 
If you use the mini library use the load from floppy option as normal in the assign fixtures menu.

no the desk does not have an option to set how many cycles of a chase it will run before stopping.

Those are the built in effect parameters and will always be under the P/T options when you press the buttons no matter what fixture you have or create.

Hi Adrian.
 
For what you are trying to achieve you would not be able to create profile to do.
There are already relay profiles in the desk under the standard fixtures.
All the profile does is tell the desk what the control channel are and the button just selects that fixture to be controlled it does not output any values.
 
For what you want you would look at either programming a a pair of pallets or submasters with the on and off value.

hi Terry,
 
think i spoke to you this morning and have sorted you out on this one.
If you have any more problems please don't hesitate to contact me.