the follow

Great info here. I'm off to the races

I use the Tiger for two intels and 8 conventionals (generics). I use Chauvet dimmers that allow me to set the DMX settings for the conventionals on them. Are you using DMX compatible dimmers?

Here is what USB View has next to the device: Device Descriptor: bcdUSB: 0x0110 bDeviceClass: 0x00 bDeviceSubClass: 0x00 bDeviceProtocol: 0x00 bMaxPacketSize0: 0x08 (8) idVendor: 0x0403 (Future Technology Devices International Limited) idProduct: 0x6001 bcdDevice: 0x0400 iManufacturer: 0x01 iProduct: 0x02 iSerialNumber: 0x00 bNumConfigurations: 0x01 ConnectionStatus: DeviceConnected Current Config Value: 0x00 Device Bus Speed: Full Device Address: 0x01 Open Pipes: 0 I don't see the other info. I found the VID/PID info by clicking START/RUN/devmgmt.msc Do you think I found the right info? Also, I don't see anything in my INF files under Directory Cache. I have a folder for i386 that has about 12 things in it, but nothing for USB Desk Link Cable. Thanks so much guys!

USBVID_0403&PID_60015&6F756CC&0&2 is what I show, so it must be the cable. This is an expensive cable too! I'm sure my return time period is over since I bought it a year ago. I couldn't get it to work then and had to put a show together so I created my own profile for my High End Stuido Spot 250s. However, I can't get the "Brightness" fader to work, so they are either ON or OFF...I can't fade to black. Would you have any other suggestions on how to assign Brightness control to the Brightness Fader within a custom profile?

Keith, Thanks for the reply. This is exactly what I do and it says "can't find drivers" or something along that nature. Could it be that the Tiger uses a different driver than the Diablo?

Hello. I have tried to get the drivers to install on my computer for the Diablo Fixture Manager. I'm using a Chauvet Tiger (Zero88 Diablo). I've tried it on a Win98 machine as well as WinXP. Any ideas how to make this work? I can find the proper folder, but the driver installation wizard can't find the needed driver(s). Please help! Thanks! Mat