Laubfrosch

Hi Mathias, its just a workaround yet. I´ld patch the Sunstrips as single Dimmers (like Jon suggests) and afterwards build groups for each unit and other selections which make sense in the rigg.

Probably a silly question.... USB connected?

Hello Bernhard, 1. I crosschecked the original fixture libs for the PL1 and PLCyc 8 bit. Both have the White Channel on 100 % Default and Home Value. You may set thoses values to 0% by editing the Home and Default Values in Setup Syntax : SETUP/EDIT FIXTURES/ repeat push GROUP till PL1 are displayed/select DEFAULT and set WHITE to 0% on the "ALL" Line. All PL1 are set to WHITE 0 now. Repeat it with the HOME value. Leave SETUP Probably there is a request to confirm changes. Now your colours shall be ok. 2. just push clear twice. all manual changes are cancelled. If using the fader and going back to 0 this value is handled with priority. If you need a fade. pull or push the fader to the programmed value as fast as you like to do the fade. if matches the value push CLEAR twice. 3. Regarding crossfade playback of different pages. You are right (Jon pls correct me if I am wrong! ;-)

Go ahead! Than we ´ll have a common operating philosophy for all ZerOS desks. Makes operators life much more comfortable. Cheers Sven

A new Level... of tele-conference.

Best Zero 88 Communication tool is the Level 6. Its handy, well "weight to flight" balanced. finds place in nearly every pocket, And the most important feature..... you may regulate the impact by a master fader before Level 6 leaving your hand to transmit your message.......

Hi Luke, Sry I can´t help you with the crash issue. Regarding your chase "problem" do as follows. Programm your chase as you like. If you have finished the needed chase steps push and hold "setup" plus dedicated chase playback button. Now the Playback Option window popps in. Here you may select the Crossfade for the general Chase behaviour. The line below allows you to select the fading percentage for each attribute group (Colour, Beam etc.) set the colour fade to 100% and your colour will fade from step to step. This might not work on spots with colour wheels! Some spots do not support a fade and work with colour index mode only.

Hi Keredylesob, in which way do you set the Offset?

Hi Keredyelesob, do you want them to follow each other? If so try the "mark on" efx and set the offset shifted mode to fan first/fan last.

Hi SDGLight, you tried to overwrite the origin "factory Lib" with your user Lib which is not possible. To assign your fixtures to your desk pls follow further steps. connect your usb stick with your user fixture lib. activate setup mode and go to assign fixtures. choose "add fixture". 1.Now you will see a few options displayed in the upper MFK display. choose USB stick. the desk reads your usb stick. 2. Select your user fixture Lib. 3. Next you need to select manufacturer by pushing mfk of start letter. 4. select fixture type 5. assign MDK fixture Button. 6. repeat upper steps till all your fixtures are assigned. 7. exit "assign fixture" 8. patch you fixures. cheers Sven

Hi Mathias, you may download the quick reference guide here. http://zero88.com/de/manuals/FLX%20Quick%20Start%20Guide%20V1.3.pdf I hope this helps. Cheers

Hi Brandrick, the desk and the pad/phone/pod need to have the same IP "starts" if subnet is set to 255.255.255.0 Please also set the Pad to static IP TCP IP Set up shall look like the following example Desk IP for Remote 192.168.010.001 iPad/Phone/Pod IP 192.168.010.005 I hope this helps.

Hi Vivo welcome to the club! Where did you buy your Solution? If you need detailled help just send me a PM with your contact data and your questions. We can do it in german then. Cheers Sven

Hi Mr. Huber. you may use the REM DIM Function. Syntax as follows. Fixture No. x i.e. 101 (SHIFT) and (FULL) The selected fixture is set to 100% and tagged if selected fixt. intensity is 0%, All not selected fixtures are set to 0% Please also have a look at page 136 ff ORB Manual Issue 2 For further information just give me a call! Cheers Sven

Hi Lxkev, I am working for RTC (the austrian distributor of Zero 88) with more than 10 years experierence of Zero 88 products now. As you I am following this forum for years now. I do not agree your statement of a doggy OS. It works okay within its specified features. Some issues of the 8.0 occured after a responsible person left the company which have and shall be fixed BEFORE the release of the 8.0. You played on a Beta of the release 8. So why are you complaining about a crash. The reason of Betas is to find such bugs! We all need to be a little patient now to get the new release, well tested!*:-) If you have made your decision, okay! But stop bashing around. BR Sven