Paul Bennett 211

Thanks, I will check it out. I see that they do play to add a visual timeline which would work great for me.

Thanks Edward I have tried this but the timeline is rubbish and only shows the audio track. Just need some software where you can drop a MSC command into the track in the places required. It's proving quite difficult to find something.

Hi Looking for some advice on what people are using for this. All I want to do is control my light desk using a PC. I have asked about this before and tried the software suggested. QLABs is mac only and we don't use macs. I had a look at this and it does do what I need. All i need is a timeline i can drop an audio file on then add MSC to different parts of the song to control the lights. What i like about Qlabs is the timeline view. But as we can't use apple in school i looked at SCS SCS does what I want with MSC but the time line sucks. I want to be able to zoom into the timeline so I can put the MSC command exactly where I want without having to play the track and almost to try guess. Is there any PC software out that that has both of these features that you can recommend? thanks

Hello I am hoping that you can give me some advice. We are looking at automating cues with music so that as like 0:33 in the song the lights flash or change currently we have to press the cue button on time. I am quite surprised to see that there is no duration setting within the cues as this would be really handy and very useful! Looking into this further I see i need a USB to Midi device the MOTU FastLane USB MIDI interface. Can someone please tell me what is the best Windows software to use with this? Are there any videos on how you use the software and the interface?

Morning We have a little issue that I am hoping someone can help. We currently have 2 universes setup I assume these are from DMX 1 and DMX 2 on the back of the desk. I am removing quite a few single channel tungsten lights and need a new universe so I can replace the tungsten's with LED moving heads. Tried to configure on the desk, i read you can have up to 64 universes but when I try and create universe 3 and assign to either DMX 1 or 2 i am obviously already using this and the error reflects that. Please can you tell me how I easily create a new universe please? thanks

Wonderful stuff thank you very much!

Thanks for this we will have a look at what you recommended. What i don't understand is when we created playback 26 (floor battens) we only selected these and double cleared each time so why would it have also selected the wall battens 140 thru 212? I believe we could be recording these incorrectly, to record a playback for these wall battens (140 thru 212) should we be selecting all parameters? Tagged etc we can't find this information in the manual what all those different options are, in addition when you select something you get red, green and blue.

Hi Edward. Thank you. We definitely hit double clear. We have just discovered that if we put the floor batten playback up first then put up the wall batten playback it works fine which is strange. However do the wall battens first then the floor battens this then breaks it.. The floor battens start on a lower channel 111 the wall battens are a higher fixture number. We are confused. We have tried recording it as tagged fixtures, selected fixtures all parameters etc. Only works if you bring up the floor battens first. We have also recorded the group using no settings this also does not work. Bring up the wall battens first then something else breaks it. I have attached our showfile. Playback 25 is the wall battens Playback 26 is the floor battens. You put up 25 then 26, the wall battens break. You put up 26 then 25 is fine both working with effects. test.zos

We have also discovered that even using colours when using another fader the first playback changes to white. No clue why I have added a video. The wall battens selected orange and recorded a playback. The floor battens selected red and recorded as a playback. When raise both one turns white. 20220406_100428.mp4

Hi. We have reset our desk and currently creating some default playbacks. We have an issue we have selected our battens and put an effect on them. This works by raising or lowering the fader fine. We then create another playback using the battens on the floor add an effect and record to fader two. These work fine independently but when you use both the other one stops the effect? Why is this, we have tried all the settings within the playback options but can't figure it our. Surely we can have different effects on different lights recorded and use these at the same time as they are differnt fixtures. Thank you.

Perfect found it, nice one.

That's a shame. On our old version we had this which is annoying. I just looked at the fixture that is in red. It's our JEM compact hazer pro. I watched the video and there is no fixture in the library for us. the one it suggests is the GLP Fusion Par FP7 which its obviously not. Is there a way to get the JEM Compact Hazer Pro fixture? I know it will work as is but was wondering if its possible to get them all from the library. I have used the latest library file.

OK thanks last question today i promise! We have an attached touch screen monitor. We have checked the manual but can't find a way to re-organise the panes. We would like the Groups window to extend across, and the effects to drop down and replace one of the colour palettes is this possible? I have attached a picture to show what i mean. thanks

Thank you @Edward Z88 I have updated my console now, I changed the fixtures that were red to the white equivalent. Why did I need to do this? Also the only thing I could not change and need a fixture file for is the JEM Compact Hazer Pro. This is red but there is no white version.

Thanks all. I will have a look at this today.