Jouper

Which button on the solution has been remapped to act as the Z Key on the flx

OK, so there is no other way like setting a playback specific default value, right?

How can i set the values when my cue fader is for example at 0. So for example i want my cue level from 0 to 100 to have the intensity of my fixture be 30 to 90

found it thank you

How can i set the Home Position of a Fixture on a Solution. The manual says Record and then press the home key but the Solution doesn't have a home key.

Is it possible to use visualization on the same PC via ArtNet without the Dongle?

IS it poissible to use Vectorworks Vision with ZerOS?

Thanks that worked

When i click the program window button in Phantom Zeros on a virtual solution the program crashes

Is it possible to have a fader that overrides every other cue. For example i have my moving lights and everything on my chasers and cues and i want one Fader to set all of them to a white Strobo effect

Is it possible to buy a time code expansion card and if yes where i didn't found it? by the way im from germany

I want to program all my fixtures on my zero solution then output them on sACN and then process this dmx data on something like a pc and send it back to the solution and output it on a dmx output. Is this possible with just a zero solution?

On the back of the solution is a black plastic cover. What is it used for

Is it possible to get dmx inputs from another controller like a dmx software and send them to the dmx controll? So as an example i have a dmx controll software and i am controlling my moving head with a joystick and sending this dmx outputs is it possible to pass it trough to my moving head but when i want to controll the moving head from the zero its also possible?

It creates the boot error before bringing me to the install screen so i only put in my usb stick with version 7.8.2.39 and start the console and the first thing i see is boot error