Lena

Hey, so I tested the show file during the final rehearsals on Friday and on two shows today. They work perfectly. Without you, those fixtures wouldn't have been used in this production. Thank you SOOOOOO much, you're the best! ♥ ♥ ♥ All the best from Leipzig Lena

Oh my god, thank you SOOOOOO much. I'm gonna try this tomorrow!!! YOU'RE THE BEST!!!!! ♥ ♥ ♥ xoxo Lena

Hey, thank you so much for your help, this works perfectly. However, is there also a way to control the color fade depending on the fader position? Like if I have it one-third of the way up it's red and only turns green when it reaches the top? Thanks Lena

Hi ♥, oh wow, thank you so much. You're the greatest. Here's a link to the manual: https://images.prolighting.de/manuals/51785920-Anleitung-eurolite-led-tmh-w555.pdf The 48ch mode would be perfect, but 24 or 36 would work as well. Thanks in advance for your help, you're the greatest! 😊 Lena

Hi guys, we're having a show at work where they want me to mimic a battery which is charging from low (zero) to full (green) with orange in between. I hooked up an M800 LED spot to my FLX S24 for that matter and used three faders, one for each color. However, I wonder if there's an option to have a single fader which controls the color fade. Any ideas if this is possible and how? ♥ All the best Lena

Hi guys, it's Lena from Leipzig! ♥ I've got some new fixtures at work: Eurolite TMH-W555! 🙂 But when I tried to hook them up to my FLX S24, I couldn't find a suitable fixture file for this light. Any ideas how to proceed? 😭 Thanks for your help, guys! Lena

Hey guys, we've got a problem with our FLX S24. Somebody opened the flight case and ... dropped the top part of it. And guess what, it hit the display. 😞 It's still working fine but doesn't look any good. So my question obviously would be: Is there any chance I can fix this? Thank you in advance for your help & all the best from Germany Lena ♥

Hi guys, I have a problem using Cameo „Movo Z Beam“ Moving Heads with my FLX S24 console. Most parameters work totally fine, but when it comes to controlling the LED ring (should be ondmx channels 22 upwards), I just can’t tweak anything. Any idea what I‘m doing wrong? 😞 xoxo Lena

Dear Edward, thank you so much for your help and all the information regarding the training material. I've already started watching some of the videos and I'm pretty sure they'll help me a lot. As I'm at home right now, I've also started to spend some time with the Phantom ZerOS application which is a really great way to work with the console without having it a my hands. One thing I tried so far is to program some faders to certain positions/scenes and some only to colors. However, I can't really make this work right now, as the position parameter always gets stored in the color faders. I know there must be a way to do this, but I didn't figure it out yet. So do you have any tip for me what I'm doing wrong? How can I programm a fader to just control one parameter? It's supposed to be like that: For example, pushing fader 1 up creates a certain postion, while pushing fader 7 up turns all these lights into blue. Thanks in advance for your help and all the best for a great weekend xoxo Lena

Hi guys, I work as a guitar teacher at a local music school and during events and shows I'm responsible for the lights. Our venue used to have small Elation DMX Operator Pro which has now been replaced by a Zero 88 FLX S24 2U. For the lights, we have like six par cans as front light and eight moving heads in the back (Cameo spots/washers/Showtec led pars). My job's now to setup everything from scratch and make it work according to my needs. As I'm not a "trained" light technician, I'm used to figure out everything on my own, which worked quite well with the Elation desk. My programming logic for the moving head there was to work mainly with scenes on the 8 buttons per page which I programmed like palettes of colors and different moving effects. However I don't know which way of setup logic would be best for the FLX 24. How do you distribute your faders in the best way? Do you use the faders like scenes? Or do you take several faders for controlling colors and others for controlling positions? The only thing I'm sure about at the moment is to take one set of faders to control the front light (which is just on/off). I tried to find tutorials or guides on this, but I could only find stuff about the patching itself. Just to make sure: My problem is not about patching itself or understanding the cues and stuff. It's more about how to setup the desk in the best possible way. Ah, and maybe it's also important to know that I'll be at the desk all the time so I don't need fully automated shows or something! 🙂 Thanks in advance for your help and all the best Lena 🎸