LighterTim

I am running the latest version in Demo Mode (A friend has an old license key, but I wanted to test it first), but it doesn't say on the website if Artnet is enabled within the demo or not. But It should be working, because it's not grayed out or anything. There is a window which shows the current dmx values for each universe, but it never showed anything there while I was testing. I asked google about it, but couldn't find anything. I tried the student edition and it works fine over ArtNet and CITP which means the problem is caused somewhere within Realizzer. Thanks, Tim

Unfortunately, it still doesnt work. I've set my PC to 2.1.1.1 and the console on 2.1.1.2, and it was the same result as with the switch. Realizzer is still sending with a limited broadcast and I have no Idea how to change that. The Console even says that there is 1 device connected but in SETUP -> Devices is nothing listed. I might just look for antoher Visualizer and see if it works to rule out any Windows problems. Any recommendations? Thanks a lot for your help! Tim

Unfortunately it didn't change anything. But what I noticed was that as soon as Realizzer started sending replie's there was no ArtNetPoll from the console to be found in Wireshark. Could it be that the access point is working to slow (I also noticed that the access point was heating up pretty fast)? And is there any way to connect the console directly to the PC? Thanks, Tim

I am actually using an old netgear access point with a DHCP built in. First of all, I disabled the firewall and restarted Realizzer. But now I'm just confused, because (according to wireshark) The S24 is only sending ArtPolls to 192.168.178.255 and Realizzer is actually sending ArtpollReplys but to destination 255.255.255.255. Is that normal (:? It is. Tim

Hi, sorry for bringing this up again but I have the same problem except Realizzer does not detect any data (I only checked the first 15 universes). Artnetominator and Dmx-workshop are giving me the same information as bungeefield. My Pc and the Flx S24 are both configured to DHCP IP with a switch (Pc: 192.168.178.66, Console: 192.168.178.37, artnet is being transmitted on this IP, too). I'm running ZeroOS 7.9.7. I am going to attach my show file. I don't know if I'm missing something (Been trying for 2 days now), any help would be greatly appreciated, thanks Tim artnet.isf