Jolly Jumper

Dear Kevin/Edward ! Thanks for the quick response ! Can you please take a clear FLX S24 , connect a simple RGB-LED PAR-Can to it and do simple and true colour mixing with the playback-faders ? -> raise all the 3 RGB faders and see if you get white in full brightness -> please try it out and give a response -> then I know that I'm doing something wrong I tried all the guides (also the linked one with an extra Colour-Mix-Intensity Fader) and on every TRY-Out I start with a reseted FLX S24. I tried out a simple RGB-LED Can (3channel mode) and also a simple RGBW Can (4channel mode). I also found my used fixtures in the database and set them to the right mode. Right now the only explanation for me is that true colour mixing with 3 faders is not possible. Thanks a lot !

Hey folks ! I managed it to seperately control the R/G/B channels via 3 Playback Faders. Problem: I raise the red Fader to its maximum -> get a perfect red (R255/G0/B0) I raise the second fader (green) -> the colours start mixing -> at maximum I should get a perfect yellow (R255/G255/B0) But !!! : the red LEDs go darker until they're out at the maximum of the green fader, although the red fader is still at its max When the green fader is at 50% I get a kind of yellow but not with the full brightness. When I raise all the 3 Faders to their maximum I should get the brightest white but I get red / green or blue (wether wich fader I move last to its max). I tried every possible Fader setting (HTP, LTP, ...) and red all the instructions in the manual and in the forum with no solution. Any Ideas ?