tribo
-
Posts
6 -
Joined
-
Last visited
Posts posted by tribo
-
-
Aha!!!!! - fresh battery - fresh floppy disk - BINGO! - we have an upgraded desk!!!!
Thankyou Kevin and Edward - 5 gold stars each! 👍😀👌
-
20 minutes ago, kgallen said:
Weird. The FrogOS on the floppy is an uncompressed file isn't it?
Might be time to check the battery unless you've changed it recently (below assuming your Fat Frog has a VGA output):
ok.... I've replaced the battery and now it starts up with the upgrade disk (formatted on the console) but it loads the old OS
The file on the floppy is frogupg.osf (854kb) taken from zero88 website
Arrrgghhhhh!
-
Hi again,
I tried the OS upgrade and it tried loading it but then I get "desk ID is invalid"
"serial number not recognised"
"startup halted"
it won't go any further than that - if i remove the disk it starts up with the old OS.
any ideas?
-
Thanks Edward - the fixture file is one I made for our PARs.
I'll get the latest OS on and then edit the fixture file - fingers crossed! 😀👍
-
Hi all,
This has probably been asked and answered before but here goes....
fat frog running 48 dimmers and 8 individually addressed stairville LED pars starting at 49 (set as fixtures)
each par has 4 channels - 49 mode, 50 red, 51 green, 52 blue, then the next one is 53 mode, 54 red, 55 green, 56 blue etc etc......
This all works fine when you're just programming memories - you use the wheels to get the right colour in the right place....
but the grand master does not control the overall brightness. - Is there a way to achieve this?
Secondly - if I try putting individual colours onto subs (either as channels or memories) it fades the previous sub - even with the previous sub fader still up.
All suggestions welcome! :) cheers
Grand master control of fixtures
in Frog Range MK1
Posted
Thanks again guys.... even got my fixtures working on the grand master now! - happy days 😀