Jump to content
Zero 88 Community Support Forum

Tom_OrbXF

Members
  • Content count

    3
  • Joined

  • Last visited

Everything posted by Tom_OrbXF

  1. Tom_OrbXF

    WYSIWYG and Phantom ZerOS

    Hi, Looking at designing a show on PC with WYSIWYG. Absolute beginner to networking so if anyone could talk me through the process that would be great. Not sure whether I will do it all on 1 PC or on 2 separate machines, so If you could explain both that would be great! Using an Orb XF and most current WYSIWYG (R39) Thanks Guys
  2. Tom_OrbXF

    WYSIWYG and Phantom ZerOS

    Thanks, If I am using 2 devices what should I be setting my IP addresses to? Can't seem to get them to talk to each other! I have linked them with a Cat5 cable, opened phatom on one and capture on the other. Then enabled Art-Net. Am I missing a step there? Thanks
  3. Tom_OrbXF

    WYSIWYG and Phantom ZerOS

    Thanks for your reply, Potentially I do go down the Capture route, my current job means I don't always have access to the desk so to be able to program with the phantom would be useful. A couple more questions if that is ok. Will I notice any massive differences between capture and WYSIWYG or are they fairly comparable? What is CITP? My Set up will probably be one laptop running it all (Visualiser and Phantom) when travelling, 2 separate machines one running Phantom, one the visualiser when at home, then console and visualiser in the venue (If it is easy enough to interchange between those operation modes) Thanks
×

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.