Jump to content
Vari-Lite Controls Support Forum

Edward Z88

Zero 88 Alumni
 View Profile  See their activity

  • Posts

    3,292

  • Joined

  • Last visited

  • Days Won

    85

 Content Type 

Posts posted by Edward Z88

  1. Slow progressive colour change

    in FLX

    Posted

    Hello,

    Yes, for this I'd program a new playback. Record 50 cues, each one turning each pixel from your chosen blue, to your chosen orange. I'd recommend using palettes for this, so that if you wish to change your night time blue, or your sunrise orange, you can update the colour palettes and all 50 cues update automatically. As you step through each fixture and change it from blue to orange, you may find the SHIFT + Right Arrow key shortcut helpful, for selecting the Next fixture.

    Then for each cue set a colour fade of 30 seconds, and an Auto With trigger, with a wait of 6 seconds. I'd recommend temporarily changing the console fade time defaults, to save you having to change 50 cue's fade times. To do this tap SETUP -> Defaults -> Cue Colour Fade.

    You can then trigger this playback from a cue in your Master Playback if you wish, whenever you need to use this sunrise effect.

    Hope this helps,

    Edward

  2. UDK

    in FLX

    Posted

    Hello,

    Thank you for the request. 

    As you say, FLX has 4 physical UDK buttons, however 40 in total across 10 playback pages. They are page locked by default. There are no plans to add UDKs to FLX S consoles, as this is a more advanced feature.

    Edward

  4. Any way to get fixtures independent of Solo effects

    in FLX

    Posted

    Hi Mac,

    There's currently no way of preventing a playback from being inhibited by another playback that is soloed. However, UDKs won't be inhibited by a playback being soloed. You could therefore have an intensity programmed for your FOH on a UDK that can be latched on before you solo a playback.

    Hope this helps, 

    Edward

  5. DMX Universum Crash 7.9.5

    in Leap Frog 48 & 96

    Posted

    Hello,

    Sorry to hear this. 

    Have you created a show file from a fresh install, or have you loaded an existing show file into the new software? Please could you send us a copy of this show file to support@zero88.com, and we’ll take a look to see if there’s anything causing the issue.

    Has the console offered to dump a debug file to USB? If so could you send these across?

    It is possible to roll back the software to ZerOS 7.9.4 if you wish, however we haven’t come across this issue before. ZerOS 7.9.4 can be downloaded here...

    For information on setting Default values, see below...

    http://support.zero88.com/1011707631

    2 hours ago, MihiGyver said:

    By the way it would be awesome to have a second window with White, Amber, and UV or what ever needed by the color picker. (Im thinking about buing rgbwauv par)

    The colour picker will use RGBW chips for colour mixing if present. Other chips will be available via the encoders. 

    Hope this helps, if you have any questions just let us know. 

    Edward

  6. Equinox 120 Zoom - no light (Newbie)

    in FLX S24 & FLX S48

    Posted

    Hello,

    See if there is a “Shutter” parameter or similar under the Beam attribute. What value is this set to? 

    Most fixtures personalities should be configured so that when intensity is raised, you will achieve White light output. Therefore parameters such as RGBW or Shutter are preset at values specified in the fixture’s manual to allow this. 

    Edward

  8. ZerOS 7.9.5 Released

    in News & Announcements

    Posted

    Hi Steve,

    Just to confirm, what console is this on? What software version were you running previously before updating?

    I would recommend doing a fresh install of ZerOS 7.9.5, using the instructions available here...

    http://support.zero88.com/1518910761

    Once ZerOS 7.9.5 is freshly installed, you should find new effects are available when you press the "Auto Create Effects" button.

    If loading in the show file into the freshly installed software is still causing issues, please send us a copy of your show file to support@zero88.com, and one of the team will take a look to see what may be causing the issues.

    Hope this helps,

    Edward

  13. File does not contain an upgrade package

    in ORB & ORB XF

    Posted

    Hi Paul,

    Just to double check, the software installation application to be loaded into the console is "ZerOS OS Creator USB - v7.9.5 17-5-2019 MD.exe". If you are running ZerOS 7.9.4 you will be able to tap SETUP -> Load File, and choose this file and load it in.

    Also available with the ZerOS 7.9.5 download is Phantom ZerOS 7.9.5. This is not the console software - this is the offline editor. If you try loading this into the console you will receive the error you described.

    Hope this helps and solves the issue.

    Edward

  15. connect Phantom with L8 on same PC

    in FLX

    Posted

    Hi Walid,

    If you wish to communicate with Light Converse, you'll need to route your lighting data to the PC's loopback IP address, which is 127.0.0.1. It will be one of the IP options on Phantom for each protocol.

    I believe Light Converse will be listening on this IP, however you may need to manually change this in Light Converse.

    Only use one of the protocols to communicate with Light Converse, and disable the rest. It doesn't matter which protocol you use from Phantom's point of view - I'm not sure whether Light Converse recommend a protocol in particular.

    Hope this helps, if you have any questions just let us know.

    Edward

  16. Moving head issues (Newbie)

    in FLX S24 & FLX S48

    Posted

    Hi Kevin,

    2 minutes ago, kgallen said:

    is this the same a No Effect or would it HOME the fixtures C/B/P too (which is probably undesirable).

    EFFECT + HOME is the same as the No Effect palette - it simply stops any effects running (the syntax EFFECT 0 ENTER also does the same). In the same way COLOUR + HOME will just home the colour of the selected fixture.

    30 minutes ago, kgallen said:

    Also creating the block cue would disrupt move-on-dark for other fixtures. If this understanding is right and hence there are implications, how else could this be achieved?

    It would only give hard values for that cue, therefore only fixtures that needed to Move On Dark for the next cue wouldn't be prepped. When you go into the cue after the block, fixtures could then move on dark for when they're next used.

    Edward

  19. Moving head issues (Newbie)

    in FLX S24 & FLX S48

    Posted

    Hello,

    SmartTag will register a fixture as "off" when at 0%. Therefore if a fixture is at 1% SmartTag will include it.

    If this is causing you problems, you can simply hold RECORD, tap SmartTag so that it has a blue stripe meaning disabled, and then press RECORD to close the window. Now all tagged fixtures will be recorded, including those at 0%.

    For more information on tagging including SmartTag, see below...

    http://support.zero88.com/1014189311

    Fixtures can't be created with a minimum parameter level.

    Hope this helps,

    Edward

  20. Undo

    in General Discussion

    Posted

    Hi Simon,

    There isn't a way of undoing updates. Currently there is no way of importing certain parts of a show file.

    Best practice before doing updates, is to ultimately save your show file, but also copy your Master Playback to a different playback, as a backup. You can then copy from this backup, back over the top of the Master playback.

    Edward

  22. Go button does not work as expected

    in General Discussion

    Posted

    Hello,

    Have you changed the Master Playback's Fader Function? To find out hold SETUP and press the Master Playback's button. The default is HTP Master. If it is set to either of the Manual Fade options, the Go button is disabled. The fader's travel will then allow you to advance between cues instead of the button. If you want to use the Go button, change this back to HTP Master.

    Hope this helps,

    Edward

  25. Still confused by recording Effects palettes

    in FLX

    Posted

    Hi Kevin,

    No reference number for this one currently.

    When RECORD is pressed, and an empty palette button marked with an asterisk is touched, this automatically applies that attribute’s relevant filters.

    However when RECORD is followed by the attribute key, the attribute filter is automatically applied in the record window, however then allows you to customise the attributes. If you were to press a palette button at this point, the usual rule is applied and only that relevant attribute is stored. Whereas if the palette number is typed, followed by enter, this stores your palette with your custom attribute filter. 

    Hope this helps,

    Edward

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.