soakes94
-
Posts
3 -
Joined
-
Last visited
Posts posted by soakes94
-
-
I had tried one just like that one in the link and it didn't work! Thanks for advice I will maybe pick up a USB sound card with MIDI. 2 birds with 1 stone!
Cheers
Stephen
-
I was wondering if anyone has controlled the FLX with MIDI? I'm planning to cue the desk using Q-Lab and just wondering if anyone has done this before and if so what USB > MIDI controller did you use?
I don't have a controller yet so would need to buy one but want to make sure I buy one that works, had bad experience with cheap MIDI controllers that just don't seem to do the job.
Cheers
Stephen
Faulty Beta Pack's V3
in Power
Posted
So recently I've started to notice in most of my beta packs. I tend to use pre-heat on all the channels and recently the intensity of the pre-heat seems to be increasing, theres a difference between Beta packs and channels. The pre-heat intensity always is the same between outputs 1 & 2, 3 & 4, 5 & 6.
I have 9 beta packs in total all with similar serial codes 8 out of the 9 have issues and it wouldn't surprise me if the other one started to develop similar issues. I have posted below each of the beta packs serial numbers and faults.
Dim 1 0030711 06420048
Channel 1 - High Preheat
Channel 2 - High Preheat
Channel 5 - Possible High Preheat
Channel 6 - Possible High Preheat
Dim 2 0030711 06420061
“Err” displayed
Channel 2 - When lamp plugged in it flickered briefly
Channel 6 - When lamp plugged in it flickered briefly
Dim 3 0030711 06420055
Channel 2 - When lamp plugged in it flickered briefly
Channel 3 - High Preheat
Channel 4 - High Preheat
Channel 5 - High Preheat
Channel 6 - High Preheat
Dim 4 0030711 06420054
Channel 1 - High preheat
Channel 2 - High Preheat
Channel 5 - Possible High Preheat
Channel 6 - Possible High Preheat
Dim 5 0030711 06420056
All good
Dim 6 0030711 06420053
Channel 1 - Possible High Preheat
Channel 2 - Possible High Preheat
Dim 7 0030711 06420084
Channel 5 - High preheat
Channel 6 - High Preheat
Dim 8 0030711 06420083
Channel 3 - High Preheat
Channel 4 - High Preheat
Channel 5 - Possible High Preheat
Channel 6 - Possible High Preheat
Dim 9 0030711 06420080
Channel 5 - Possible High Preheat
Channel 6 - Possible High Preheat
It seems to be the pre-heat level seems to creep up slowly. So at the start it was hardly noticeable but over time (a few months) the preheat gets brighter and brighter. All of these results are using the same light, same power output (they are portable not install) and were reset before doing this list.
I have a feeling from reading other posts that this is todo with the transformer or power board and a batch of faulty components however I wasn't sure so thought I should ask and see if anyone knows which serial numbers are affected.
Cheers
Stephen