Leaderboard

Hi @Uriahdemon I am very well thank you, hope you are too. Apologies for the delayed reply - as @Davidmk mentions, I was at ProLight + Sound last week. Please boot the console into Test Mode as you did the last time you encountered issues with your faders. Please work each fader up and down, and make a note of any faders that don't respond correctly, or affect other faders. Once you have determined the faulty faders, the next step would be to squirt a small amount of Servisol Super 10 switch contact cleaner into the fader tracks and work them up and down. If there is any dirt or grime in the fader, this should clear it, to allow the fader to register correctly. Please go sparingly with the switch cleaner – too much can cause irreparable damage to the fader. After doing this, you can then boot the console again, to see if this has improved the faders. If cleaning the faders hasn’t helped, the faders will need to be replaced. Spare faders are available to purchase if you wish to carry out the repair yourself, or the faders can be replaced by one of our service centres. I hope this information is useful. If you have any questions, please let us know. Edward