Jump to content


Edward- Z88

Member Since 01 Jun 2017
Offline Last Active Today, 07:34 PM

Posts I've Made

In Topic: Phantom visualiser?

12 August 2017 - 10:23 AM

Edward, would it be possible to add a wysiwyg or capture dedicated output? Similar to what's on grand ma? So we can putout to a visualiser but not to actual lights?

 

Hi James,

 

No I'm afraid not.

 

Jester doesn't have Networking capabilities for visualisation streams/ Art-Net/ sACN, therefore that wouldn't be within the scope of PhantomJester.

 

Edward


In Topic: Error 004 showing on Zero 88, Jester 24/48, Help please

12 August 2017 - 10:18 AM

Thanks Ian,

 

Yes after resetting the console this error message will clear and you will be back up and running.

 

Edward


In Topic: Topset and Pan/Tilt swap - moved features?

12 August 2017 - 10:16 AM

Hi Mike,

 

As per ZerOS 7.9.2, these are set in tabs along the top of Edit Fixtures in SETUP. There is a dedicated tab for Topset, and Pan/Tilt Swap comes under the Alignment tab.

 

Hope that helps,

 

Edward 


In Topic: Error 004 showing on Zero 88, Jester 24/48, Help please

11 August 2017 - 08:11 PM

Hello,

Error 004 on a Jester most likely means the internal battery has died.
Changing the battery in a Jester is a simple fix, and the battery's can be purchased in most hardware shops.

If you're confident you can open up the Jester, it's a CR2032 coin battery to replace.

Edward

In Topic: Phantom visualiser?

09 August 2017 - 08:40 PM

Hi Brian,

No there is not a visualiser for Phantom Jester.
The way Joseph hooks up his Jester to the visualiser in his YouTube videos is the only way of doing it:
DMX from Jester converted to Art-Net/sACN and input into a PC running visualisation software.

Kind regards
Edward