Jump to content
Vari-Lite Controls Support Forum

Betapak 1 Problem


Recommended Posts

Hi Folks,

Newbie here so please be gentle.

Got an issue with 1 of our betapack 1's. Channel 3 if you turn it on via demux or analogue desk it comes on to about 60% but brings CH4 on with it to 60%.

Same applies if you bring up CH4 first. But if you bring both 3 and 4 up both come on to 100% when full 

Is this something simple ?

Thanks in advance.

 

Link to comment
Share on other sites

I'd be looking at the control cable for that rack first (they do fail!) - sounds like a whisker touching two pins.

After that, you'll need to take the mainboard out to check that - if you're happy fault finding a PCB using a multimeter and a soldering iron, then it should take about an hour plus removing/replacing the PCB.

Or...

You could send it me to look at - The Service Guy

Ian Knight aka The Service Guy - www.serviceguy.co.uk

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.