Carwyn Posted March 2, 2018 Report Posted March 2, 2018 Hi Guys and Gals I Need to build a fixture up, it is basically led tape which I've installed on the steps at the venue. controlls need to be RGB and intensity the controller is a 3 channel controller so how would i get the intensity to control the whole unit then HELP
kgallen Posted March 2, 2018 Report Posted March 2, 2018 If I understand you correctly, you have RGB LED tape and the driver (not really "controller") is 3 channel. This is fine, you can have a "virtual intensity" channel - so 4 channels on your lighting desk and 3 DMX channels to the driver. There will be an RGB+virtual intensity already in the fixture library, or just build one in the Fixture Editor. Or attached which is one I built myself for RGB LED tape: led_rgb_vi.ift
Carwyn Posted March 2, 2018 Author Report Posted March 2, 2018 All done now mate werent looking at the fixture editor properly
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now