Jump to content
Vari-Lite Controls Support Forum

Touch screen not working


Pinky

Recommended Posts

Recently purchased a new FLX console. When I turned it on for the first time the touch screen is not working. I have run the front panel reboot test (holding down the setup key during the boot process) and this enabled the keys to light up when pressed but the touch screen is still blank. Has anyone seen this issue before and could offer advise on how to fix it.

Link to comment
Share on other sites

If it's new I'd get back in touch with the company who sold it to you as the first step.

 

When you say "not working" do you mean the screen is blank or the screen displays but the touch-ness does not work?

 

Do you know what version of software it's running?

 

Also you could PM(*) the serial number to Jon/Keith/Ed so they can follow up with any query.

 

 

Kevin

 

(*) Actually until you've had 10 posts I don't think PM is enabled. But I'm sure Ed or Jon will be along here in a very short time...

Link to comment
Share on other sites

Hi Mike,

 

So to ask a daft question, was the screen working when you first had the desk and now it's not working? Has the desk been dropped, bumped sharply etc in the meantime? Any event that you thing might have caused an internal cable to come loose etc?

 

If you're not on the latest software can you install that - or even any other version to see if it comes to life?

 

Have you got an external monitor and is that working?

 

Where are you located? If needed are you close enough to make a trip to Cwmbran (near Newport in South Wales, not that far from Bristol).

 

Ed and Jon seem to be on an extended lunch break today, as I would have expected Ed to jump on this thread pretty quickly.

 

Might be worth a call to Zero88 offices as they will probably be able to diagnose this quickly one way or the other:

 

Technical Support

Telephone: +44 (0)1633 833101

Email: support@zero88.com

Link to comment
Share on other sites

Pinky........I would not be too hasty in immediately saying there is a technical fault with the desk. I had the same problem with my desk when getting it new a few weeks back. I persevered and the issue was the desk not seeing the touchscreen. I updated the software and hey presto... it worked.

 

Is your touchscreen on the compatible list on the Eaton website. Dont worry if it is not as this is being added to all the time.

Link to comment
Share on other sites

Pinky........I would not be too hasty in immediately saying there is a technical fault with the desk. I had the same problem with my desk when getting it new a few weeks back. I persevered and the issue was the desk not seeing the touchscreen. I updated the software and hey presto... it worked.

 

Is your touchscreen on the compatible list on the Eaton website. Dont worry if it is not as this is being added to all the time.

Hi Mac,

 

Pinky's issue was the internal touchscreen wasn't working, not an external monitor.

 

Edward

Edward Smith
Product Specialist

Link to comment
Share on other sites

It was a loose connection inside the desk.

Hi Mike, if you don't mind, please could you email me your serial number as I'd like to get this recorded as a "Customer Comment" so we can keep track in case there are any similar issues in the future.

Jon Hole
Global Product Manager, Systems and Control

Link to comment
Share on other sites

  • 3 weeks later...
  • 5 months later...
1 hour ago, Guest Phillip said:

our new flx's touchscreen is not responding. i touched the whole screen but no response nor it detects my fingertips

Hi Phillip,

Do you mean the screen built into the FLX or an external touch screen monitor?

If the external screen, after you have started the Calibration, press the Update key and then see if the monitor is responding to touch.

If the internal screen, sorry the Zero88 guys will have to help you out...

Kevin

Link to comment
Share on other sites

  • 2 weeks later...
On 1/16/2018 at 9:04 AM, Guest Phillip said:

our new flx's touchscreen is not responding. i touched the whole screen but no response nor it detects my fingertips

Hi Phillip, I'm assuming this has been solved as you haven't replied to Kevin's questions, but if not - please email support@zero88.com and we'll get it sorted straight away.

Jon Hole
Global Product Manager, Systems and Control

Link to comment
Share on other sites

  • 2 months later...

Hi Guys,

I seem to have a similar problem here.
I received my brand new FLX desk today and was eager to test it out. I switched it on and was wondering why the touchscreen stays blank. And I was wondering some more how long it takes to boot up. But - nothing. I attached an external monitor and there was some output. So the desk seemed to be working but the internal screen still is blank.

Somehow I managed to update the software to the newest version, not knowing which version it was before, because this information seems only to be available on the internal screen. But its still the same beaviour, no output on the internal screen. Please help.

Martin

Link to comment
Share on other sites

Hi Martin,

Really sorry to hear this. Who did you buy the console from?

If you boot the console with the SETUP key held, this will take you into Test Mode. With the external monitor disconnected, does the internal touchscreen come on?

Connect are our Authorised Service Centre in Germany, so you'll be able to get this fixed through them- and don't forget if its brand new you're covered by the 3 year warranty.

Feel free to email us directly at support@zero88.com, if you'd rather sort this over email.

Hope to get this sorted for you as soon as possible.

Edward

Edward Smith
Product Specialist

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.