pweijden Posted December 9, 2015 Report Share Posted December 9, 2015 Hi All, could someone help me with the fixture profile for the Beamz MHL-74 12 channels? The manual can be found here: http://www.wlshop.nl/files/content/files/150_518_Manual_vI.pdf Many thanks, Paul Quote Link to comment Share on other sites More sharing options...
JB97 Posted December 9, 2015 Report Share Posted December 9, 2015 I'll give it a go now, but I might have to defer as I'm not amazingly confident xD Edit - I couldn't see how to best do the split for 8/13 channel mode... Or how to do pan and tilt fine.. Sorry :/ Quote Link to comment Share on other sites More sharing options...
kgallen Posted December 9, 2015 Report Share Posted December 9, 2015 Try this one. No detail in the manual for the sub-channel detail, so you'll have to suck-it-and-see! Note - no 12 channel mode; manual provided has 8 and 13 channel modes... Kevin Edit - I couldn't see how to best do the split for 8/13 channel mode... Two separate fixture definitions within the one manufacturer, one for 8ch one for 13ch. I usually create the larger one, then chop down for the smaller. Or how to do pan and tilt fine.. Sorry :/ Make Pan and Tilt 16-bit ( Size=Word {16-bit} ), then set the Channel (LSB) for the Fine, and the Channel (MSB) is then the Coarse. beamz_mini_wash_7x10w.ift Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.