Tony Dawson Posted October 22, 2015 Report Share Posted October 22, 2015 Trying to get my FLX working with a touchscreen monitor but it isn't working vision great but no touch I have connected USB from monitor to FLX. And tried restarting the desk but no luck Is there a setting somewhere that I have missed. Quote Link to comment Share on other sites More sharing options...
iank99 Posted October 23, 2015 Report Share Posted October 23, 2015 Have you calibrated the touchscreen? There's an option in the system menu's to do this... Quote Ian Knight aka The Service Guy - www.serviceguy.co.uk Link to comment Share on other sites More sharing options...
kgallen Posted October 23, 2015 Report Share Posted October 23, 2015 I found that after touching (on the internal screen) the "Calibrate" "button" (<Setup> then System Settings), I had to press Enter on the desk to get the external touch screen to show the calibration points. Subsequently re-calibrating, I don't recall having to press Enter... I was using the recommended iiyama T1731SR touch-screen monitor. I must confess I didn't find the touch screen response particularly accurate or fast - hence the multiple attempts at recalibration, which didn't particularly improve things. This may well be the nature of these things, this is the first time I've use an external touch screen of this type. Firmware was 7.8.4. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.