Jump to content
Vari-Lite Controls Support Forum

Movers in sub master on frog 48


Shaunlsstudios

Recommended Posts

Hi The intensity of the movers should be recorded as part of the sub. Are you clearing out the programmer before running the sub? If you have manually set the intensity to say 100% then this value will be held in the programmer and will take priority over subs Untill cleared. (This does however depend on the desk mode)

 

Another thing that could be causing this is having the sm mode set to 'not release'. To access the sm settings you can hold down the setup button then press the flash button for the recorded sub.

 

hope this helps.

Link to comment
Share on other sites

  • 2 weeks later...

I'm guessing, as keredyelesob suggests, that this is because "0%" is in the programmer - and the "programmer always wins"!

 

Pressing CLEAR twice will remove the 0's from the programmer, and the submaster's intensities will start working.

Jon Hole
Global Product Manager, Systems and Control

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.