Kirkup_xp Posted February 6, 2004 Report Share Posted February 6, 2004 This may be a desk specific error (I have spoken to Z88 and that is their suggestion) but I thought i'd post on here anyway incase anyone else has had the same symptoms: When plotting our current production, we noticed that the percentage values on the Output screen are not the values that are recorded into the memory stack - the values in the memory stack seem to be 1% lower. Our dimmers must be running an odd dimming curve, but the 1% in the lower (10% to 30%) areas makes a visible difference to the state. I've checked all the masters are at 100%, and have used the test mode to check that the faders are returning 100% values. So, is this specific to our desk, or general to everyones?? To test, plot a scene where ch1 = 1%, ch2 = 2%, etc (using the generic faders) Then go into preview and see what you actually have plotted. Quote Peter Kirkup Link to comment Share on other sites More sharing options...
Tony White Posted February 6, 2004 Report Share Posted February 6, 2004 I get the same thing ch 1 set @1%, 2 @ 2% 3 @3% etc then store to submaster 1 a preview of sub 1 shows all correct as programmed, BUT playing back sub1 results in the channels being 1% down... ie ch1 = 0%, ch2 = 1% ch3= 2% Not sure if it effects me personally, but if you have a law shape in your dimmers, then I guess each % could count ! Cheers Tony Quote Link to comment Share on other sites More sharing options...
K-Nine Posted February 6, 2004 Report Share Posted February 6, 2004 This will be investigated and hopefully fixed in the next updates package. Quote K-Nine : Technically Advanced Roving Dog In Space Bran Media | Myspace Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.