Jump to content
Vari-Lite Controls Support Forum

Part Cues


vooghtay

Recommended Posts

As far as the brightness / intensity parameters are concerned this is determined by the fade up and fade down times for the memory.

 

When going from memory A to memory B the fade times programmed in memory B are used.

 

Channels which are going from a higher level to a lower level will do so in the fade down time.

Channels which are going from a lower level to a higher level will do so in the fade up time.

 

Example :

 

Memory A: Channels 1-6 @ 50%

 

Memory B: Channels 1-2 @ 0, Channels 3-4 @ 50%, Channels 5-6 @100%, Fade Up = 5 secs; Fade down = 1 sec.

 

Output memory A: Channels 1-6 fade to 50%

 

Output memory B: Channels 1-2 fade down to 0 in 1 second, Channels 3-4 remain at 50%, channels 5-6 fade up to 100% in 5 seconds.

 

Hope that helps

K-Nine : Technically Advanced Roving Dog In Space

Bran Media | Myspace

Link to comment
Share on other sites

Hi

 

You can also use dwell times and follow on cues to get multipart changes happening. For instance Q1 is a fade up, Q2 has a dwell time of 5 seconds and a fade of 5 seconds for movement. The light will fade up and then move.

 

Hope that helps.

 

Graham

Graham

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.