Jump to content
Vari-Lite Controls Support Forum

Partial recording


gatto

Recommended Posts

Set the desk into Partial Mode, ensuring that Beamshape (under SuperUser->DeskSetup->ProgramMode) is set to <Channel>.

 

Now, select your fixture and set the shutter/strobe to the rate as required. Now hold down WHEELGROUP and nudge all of the other beamshape parameters, until they read "---" on the LCD. This indicates that they are not tagged and therefore will not be programmed.

 

Now, record the submaster as normal. The data will be recorded and when you raise the submaster, the strobe should trigger to the level it was at when you set up the submaster. Note that this is a single level only, and you can change the trigger level via the Submaster screen.

 

 

HTH

Peter Kirkup

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.