Hi,
We are using 4-channel LED-PARs, which are added as Fictures (found them in the library). We would like to put a couple of colours on submaster-faders to provide wash-effects on our stage. This worked out fine put we want to smoothly crossfade between the colours.
Example: We programmed the following "scenes": On submaster fader 12: All fictures to 100% blue and 100% brightness. On submaster 11: All fictures to 100% red and 100% brightness. We have tagged the colour-parameters to be saved.
In run mode:
Submaster 12 to 50% -> stage turns blue
Adding submaster 11 to 10% -> LEDs turn red instantly! All "blue"-information is overwritten.
Putting back submaster 12 to 0% -> no change at all, LEDs stay red.
What we want: (same example)
Submaster 12 to 50% -> stage turns blue
Adding submaster 11 to 10% -> A bit of red is added to the blue
Putting back submaster 12 to 0% -> LEDs turn back to plain blue
How do we have to setup the desk?
Thank you for any help!
Oliver