prentas1

I have next question. How i can assign position for head ? I must now select fixture or group and set position. I would like it for assign head of position. It is possible for make ?

Yep, but button work for all chase, not for single.

I write new chase. 1. Set value shutter to 100%. Record it for submaster 1/1. Next set value shutter for scanner 1 to 0% Now set value shutter for scanner 2 to 100% Record it for submaster 1/1 and change type to chase. Now i have write 2 steps for submaster 1/1. Speed has beed set default for 60 bpm. My question is: how i can manualy set speed on submaster ? Not set for automaticaly for 60bpm, but for manual when value of speed is set on submaster.

Hmm, i make chase of 2 steps. 1 step: first scanner set to full shutter, 2 step: first scanner is off, and two is on. How i can edit speed for change step on submaster ? Now i change only value of shutter, when i change submaster for up, chase is working for speed set in options to this submaster.

I can write to submaster control selected intesity of moving head ? Example. I select 1,2 and 5 moving head. Set intensity for it to 100%. Save to beamshape and after to submaster ? And set submaster control only for beamshape. Does it work ?

When it was added ? What i can write to submaster of my fixtures ? Colour ? Submaster is only for write chase for dimmer ?

I test this today. And what i can make for speed ? On submaster ?

Hmm, when I edit submaster control my submaster change speed, size and offset. I don't need edit size, but i have set it for 100%. I must edit only speed. I have next question. How i can set offset for effect ? I select 1 and 2 fixtures, set any effect, select only number 2 fixtures and set offset to 50%. But this metod is'nt good when I have 30 led par. I must edit all offset for effect every time. In manual, I read to use shift key and set offset, but i can't make this in desk.

In Poland. This console is new. I have run 7.30 version on this desk. I have 48 channel version

Hello. How i can modify speed effect on submaster ? I set effect on my scanners and record it for submaster. I change size, offset and speed. I have other question. How i set to submaster value to dmx ? I have gobo on wheel, when i set rotate to 47, all go to left, when is 48 to 100, go to right. Can i seperate it for 2 submaster ? Left rotate and Right rotate ? What is tracking mode ? Sorry for my bad english :-)