Stupot

Thanks Peter I'm running the desk on offline editor in non-tracking mode. Experimenting with movement effects on mac600s. I set the intensity to full and open the shutter and select an effect e.g. [1E Circle] Then save that to a new memory. Then home the fixtures. When I come to play back the effect, I only see the Intensity value rise in the outputs window... the pan and tilt remain consant. I should be able to see what's actually happening when I get the desk at the weekend and get it patched to some real fixtures. Thanks Stuart

Thanks Peter, that cleared things up. I imagine things may become alot easier when I get the desk itself. Just one other query. Is it possible to record an effect (i.e. a movement effect) into a memory or sumbaster? If so how would you go about this. I've tried running an effect and then trying to record it, but this doesn't seem to do much. Many thanks Stu

Thanks for the support. However im still having a few issues. I gathered that I need to raise the preset and master faders to get an output on the outputs window (this only took effect when I lowered the master faders). I can now get a visible output on screen when I raise individual chanell faders, but dont get an output when running through chases or submasters? Is there something else im getting obviously wrong. Thanks

Jorge Thanks for your reply. It covered both my questions. Apart from, say for example, say I create a state with a mac600, then save it to a submaster. When I raise the submaster fader, the pan and tilt changes, but the intensity doesn't Any Ideas? Thanks in advance.

Hi There I'm using a LeapFrog48 for a show in a few weeks have been playing with the offline editor to get my head round it. Ive hit a problem, im trying to patch additional dimmers (other than the 48 pre-patched). For example, patch a new dimmer to 49, I select the dimmer to patch, enter dmx address [49], then what do I chose as a destination? Ive got 120 channels of dimming I need to patch. Ive tried the manual and done a search of the forums but not been able to find anything. Also, when viewing the outputs on the monitor, when I change a channel, either by grabbing and moving a fader, or using the command line, there is no change to the chanel output? Many Thanks In advance.