Carwyn
-
Posts
75 -
Joined
-
Last visited
Posts posted by Carwyn
-
-
HI
could anyone tell me what the trigger comand would be for
1. triger the go button over art net or go to q?
2 submaster 1 up or 1 down if this is possible
-
hi just noticed that the backspace button on the mfk's dont work is there another way round this without using the keyboard
Thanks
Carwyn
-
so i could either use an additional dmx desk or go from the dmx out to the dmx in on the same desk and put them to the channels but i do not want to take either of the options just stated. ill see if the 2 venues are willing to change desks over for the week due to a lot of subs being used 10 pages to be exact the 2 venues are run by the same council anyway so cant see it being a problem
Thanks Anyway
p.s might be an idea to put like in the comand line an option to control subs somehow
-
Hi
I have a small tour coming up where i have two venues where one has the leapfrog 96 and the next one has the leapfrog 48.
If i were to transfer the show from the 96 to 48 is it possible to operate submasters 11 to 30 on the leapfrog 48 that i pre programmed on the 96 version or should i stick to the first 10
Thanks
-
is there any way of editing a step of a chase within a Q. HELP!!!!!!!
-
THE DESK IS IN HTP MODE AND I HAVE SET THE SUB FLASH BUTTON TO SOLO BUT WHEN I THEN PRESS THE FLASH BUTTON IT ONLY WORKS ON THE SUB SECTION WHERE I WANT IT TO WORK ACCROSS THE WHOLE DESK
THANK YOU
-
is it possible that the solo setting on the submasters work across the whole desk rather than just the submaster section it soed not work on my desk what would i need to do to make it work
-
Hi
Does anyone know what movers they are using in the albert hall for children in need tonight
-
thank you all sorted now
-
what is the password for the extraction file it keeps on asking me for a password
-
hi
i updated my lighting desk on friday to update 5.2 and had a show on last night and went to run the show off the memory stack and the GO button does not work i emailed keith a bug report the other day and i just wondered is it a software issue or has the desk gone faulty.
hear from you soon
carwyn hopton
technical officer
the welfare
-
hi
i dont know if this was a part of the software update or not but re patched the desk today and found when i patched dimmer 20 in to channel 20 it did not remove the dimmer from channel 95 here is the show file attached so you can have a look at it.
talk soon
carwyn
-
how do you tag a channel
-
hi i was programming a show and i was having trouble recording states to the q stack from subs had to do it from the faders itself
any ideas
Talk Soon
Carwyn
-
you need to go in to set up and theres a setting in there to turn move on dark on or off you will need to select on
what you might find is after turning on move on dark you will need to run through the q stack once before the move on dark fully functions
talk soon
-
hi again
i've just noticed that the dmx out seems to be losing power briefly as i've used 2 separate cables in the desk and connected it to 2 seperate dimmer packs and coming out of the 2 different dmx out on the desk and that my findings show that the power on the dmx out on the desk is failing and causing it to do funny things i.e. flashing lights. any ideas
PLEASE HELP ME
Carwyn
p.s. is there a desk based test i can do to support my theory
-
hi i had some problems with a different cable some time ago i have permus D54 dimmers witch go through a dmx - D54 converter whitch i dont think theres a termination point before the through out.
The other Dmx line goes from the DMX output 2 down to stage and it has has no termination point on it.
hear from you soon
Carwyn
-
hi i was showing film today and had the leapfrog on for house lx and tabwarmers etc. during the film when all channels was on 0% and about half way through the film i had a random flash. i have a dmx line to the dimmers plugged in to dmx 1 out and a dmx line down to stage in dmx 2 out with this line neot connecting to anything and on. the output screen on the desk did not show it outputting anything
can anyone shead some light on it for me please.
carwyn
-
hi this might help this is what i was told about a month ago (CLICK HERE)
yes, it's possible to import this. You need to first translate the show from SSF to ASCII (ALQ) using the "Show port" utility which is available on the Strand website - http://www.strandlight.com/US/softwares.htmlOnce you have the show file in ALQ format, copy it onto a USB stick and load it into the desk as normal. It should load fine however there will be a few things you'll need to do -
*Effects wont be programmed
*Chases wont be programmed
*Groups get translated to palettes as best we can, but of course will need updating
The fixtures will be imported as "Fixture Type 1" "Fixture Type 2" etc, as the ALQ format doesnt contain the name of the fixture itself. Use the "Change Type" button in Edit Fixtures to change it to use the internal fixture profile, then repatch the fixture as required.
I hope this helps - let us know how you get on,
-
how do i turn off the keep warm function on the alphapack 2 as it causes a few problems with our older lights
thank you in advance
-
hi is it possible to import a strand 520 show file or load a strand 520 onto a leap frog 96
thanks in advance
-
i also agree that this feature will be a great bonis to the desk as i have the same problem when busking a show
-
thanks pete
ill try that when i get to work in the next day or two depends when this snow stops
-
when i went to save a show last night the desk frose. i tried it several times and it done the same every time it showed a window with saving please wait. i left it for about 20mins every time but froze every time.
any ideas
talk soon
carwyn
command over art net
in Leap Frog 48 & 96
Posted
what im trying to achieve is to take channels up and down on request