Primax98
-
Posts
12 -
Joined
-
Last visited
Posts posted by Primax98
-
-
HI all, well it happened on a show night , ahhhhhh.
It all went ok in the end, but this time got a crash report.
-
HI ian, thank you for the reply. i have just arrived on site....
Yes she is a busy girl indeed. we are on the road pretty much for the next 3 weeks from school to school so this could indeed be a possibility. I am awaiting my colleague to arrive before firing up the desk.
I am pretty sure i replaced the bios battery last year, however you never know how good they are out of the packet so.....
I will reply with any news.Thank you all indeed.
-
We didnt no, we were already nearly an hour late. I will attach to this post and email on when it happens nex.
Thank you @kgallen
Paul
-
Hi Guys, We are starting to have issues with our desk crashing and becoming unreliable. Typically these always seem to choose to crash during production time......
Desk is a Zero88 solution
OS 7.10
Generic Microsoft Mouse and Dell keyboard. VGA Monitor no touch screen.ZerOS System WAtchdod has detected and error condition
A debug report has been saves and can be cpoied to a USB flash drive on the next boot
SIGSEGV : Segmentation Fault!
info.si_signo = 11
info.si_errno = 0
Info.si_code = 1 (SEGV_MAPERR)
info.si_addr = 0xb4
Registers:
reg[00] = 0x00000033and there are more..........
Stack trace (non-dedicated):
Bootdev/desk/desk() [0x85a1136]and more....
attached image if it helps too.
Obviously were nervous about doing a further update.
Any help appreciated.
Thank you all.
-
Thank you.
-
When using moving heads and effect is there an east way to change the direction ???
-
Hi Edward, good point. Checked the dip switches a few times over now. Re uploaded your fixture file and controls are now swapped over other than the speed issue.
Given up for the day now and will have another go Sunday when next in.
Thanks again for the help.
Paul
-
Hi Edward appreciate the updated file however the speed control still isn't working :-/ VERY odd !
Will keep on it for now and see if I can remedy it.
Cheers
Paul
-
http://www.prolight.co.uk/ftp-in/STRO12_Manual.pdf
Hi, I have created a fixture file for this 2 channel device but it isn't behaving as it should.
The speed control seems to control the intensity and the intensity control does nothing. Am I missing something here ?
-
Hi Jon, thanks for this !
Know what to look out for next time.
Appreciate the help.
Paul
-
http://adamhall.invaliddomain.de/out/media/downloads/MARKEN/CAMEO/CLLWOOKIE150G/CLLWOOKIE_CAMEO_Bedienungsanleitung_EN_DE_FR_ES_PL_IT.pdf
I have created my own fixture for this and was hoping that someone can check what I have done and let me know if this is correct please, my first attempt at this ! :-)
Its a Cameo Wookie 600b Laser
I have tried to paste a copy of the link in here but it wont let me hence the code insert.
File attached.
Cheers
Paul
Solution Crashing problems.
in Solution & Solution XL
Posted
Yes we did in the end. There was a newer version available that we went to and all was good.
Typically that version had issues and was directed Zero88 to put their latest on.
Good luck !